The country of origin of wired headsets
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 7, 2025, you requested a country of origin ruling on headphones on behalf of your client Sonova Consumer Hearing USA LLC. The item concerned is referred to as the HD 505 Series Headphones. The headphones are considered passive headphones, which does not contain any electronics related to amplification, active noise cancellation, or other components to process/alter the incoming analog audio signals.
Additionally, it does not have wireless or Bluetooth capabilities and only connects to the audio source using a single audio cable. The headphones consist of a right and left transducer (speaker), housed within a padded ear cup, which are connected to each other with a headband assembly. We note that the headphones use the transducers to convert the analog audio signal into sound without any active electronic amplification, signal processing, or external power source.
These headphones undergo a manufacturing process in both Ireland and China. Each headphone contains two (2) transducers/speakers. Transducers are the key components that convert electrical signals into audible sound waves. The transducer is the dominant component of these particular headphones. The transducers are manufactured in Ireland. The manufacturing process within Ireland consists of: Diaphragm Manufacture. Diaphragms are the vibrating part that produces sound.
A diaphragm is manufactured using specific materials and techniques. The manufacturing process involves thin film deposition and forming with specialized machines. The production process has a high impact on the acoustic properties of transducer. Voice Coil Manufacture. Voice coils are the coil of wire attached to a speaker cone. It is the essential component in speakers, converting electrical signals into an electromagnetic moving force.
Voice coils are custom designed and manufactured to meet specific application requirements, including wire size, shape, insulation, and winding configuration. Wire Formation. This process step focuses on the formation of the lead-in wires of the coil to a desired shape by terms of a specialized mechanical process. The goal of this forming is to shape the lead-in wires to a geometry whose strain relief increases its durability without deteriorating the diaphragm movement (e. g. rocking modes).
Integration and Chassis Assembly. A chassis provides not only the positioning of the diaphragm-coil subassembly into the magnet gap but also provides the acoustic function. Thus, high mechanical accuracy of the assembly of the diaphragm-coil subassembly into the chassis is mandatory. Bonding. Bonding involves precisely soldering the wires to the contacting areas of the chassis.
All of this must be precisely conducted to ensure electrical connectivity within the whole frequency spectrum of the electrical signal without losing the robustness of the joint. Acoustic Testing. Acoustic testing involves evaluating the performance across various proprietary measures such as frequency response, total harmonic distortion (“THD”), and other sound artifacts.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N354692).