The country of origin of a reverse osmosis water system
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin of the Cloud Reverse Osmosis Smart Water Filtration System will be the United States, which is where the PCBA, permeate pump, RO membrane, pre-carbon block filter, and post-carbon block filter are manufactured.
Ruling text
In your letter dated October 8, 2025, on behalf of your client, Cloud Water Filter, LLC, you requested a country of origin ruling on a reverse osmosis water system. Descriptive literature was provided for our review. This ruling is similar to New York ruling N353301 (dated September 30, 2025); however, the U.S. manufacturing processes have been updated to include the creation of the filters in addition to the permeate pump and printed circuit board assembly (PCBA).
The item under consideration is the Cloud Reverse Osmosis (RO) Smart Water Filtration System, which is a Bluetooth-connected, sensor-driven, under-sink reverse osmosis (RO) system. The Cloud RO distinguishes itself from traditional water filters due to its integrated internet of things (IoT) technology, centered around a proprietary base unit that includes a PCBA. The device features real-time sensors that measure and transmit total dissolved solids (TDS), pressure, and flow monitoring.
The embedded microcontroller manages system behavior and allows the system to operate. A companion mobile app allows users to monitor water quality, receive alerts, and track filter life. The data transmission from the mobile app is sent to the Cloud server allowing remote system monitoring and automated diagnostics. The Cloud RO Smart Water Filtration System works by pushing tap water through a multi-stage filtration process.
The first filtering process is a sediment filter that uses a 5-micron polypropylene filter to trap larger particles such as dirt and rust. The second stage is a carbon filter, which is a 1-micron carbon block filter that removes chlorine, VOCs (volatile organic compounds), and other disinfectants. This filter also has anti-scale properties to protect the RO membrane.
Finally, a semi-permeable RO membrane is used, which removes up to 99% of contaminants, including PFAS (Per- and Polyfluoroalkyl Substances), lead, and fluoride by forcing water molecules through while blocking larger impurities. The system then adds back healthy minerals through a remineralization filter for better taste and alkalinity.
A hydraulic pump increases pressure, sensors track water quality via a dedicated app, and a storage tank ensures purified water that is immediately available through a separate faucet. The manufacturing starts in the United States with the creation of the printed circuit board assembly (PCBA). The process starts with the integration of control electronics and the user interface.
This includes the design and validation of the printed circuit board (PCB) schematic and layout, including power regulation, microcontroller selection, sensor calibration, and Bluetooth tuning. The next step involves the development of firmware that leverages the microcontroller to control the functionality, including storage protocols, broadcast frequency, and device operability. It also defines the flow of the mobile interface. Next, the bill of materials is developed along with the work instructions.
Once the procedure is set, the manufacturing begins with the population and soldering of the components using surface mount technology (SMT).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N354794).