The tariff classification of plastic caps and plugs from China.
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 20, 2025, you requested a tariff classification ruling on behalf of your client, Caplugs, Inc. Images were provided in lieu of samples. There are five products under consideration. They are all intended for different applications such as serving as a temporary masking cap / plug during powder coating or painting processes. The industrial procedure and temperatures used will determine if they can be reused. Your submission indicates nothing will be attached to these masking articles.
The first is described as the TS-19 silicone tapered cap and plug. It is used in masking applications that require temperature and corrosion resistance. This vented article can function either as a cap or a plug. The second is described as the SWP Series silicone washer plug (SWP-200-312-230) and is designed for masking around a hole for grounding purposes or can be used as a dual plug.
The third is described as the SC-SH Ultrabake™ silicone cap (SC1062-1500) and is designed to mask plain and threaded studs, tube ends, and slotted holes. It is recommended for powder coating, e-coating, plating, and anodizing. This article can function either as a cap or a plug. The fourth is described as the silicone flangeless masking plug (UFP00625). It is recommended as a masking plug for powder coating, e-coating, plating, and anodizing applications.
The plug is pushed into a threaded or non-threaded hole and is intended to protect threaded holes without masking the surrounding area. The fifth is described as the TSV Series Caplug (TSV-1). It is intended to be used as a tapered cap or plug during powder coating and curing when back-pressure could be an issue. We note that after the issuance of Jing Mei Automotive (USA) v. United States, 682 F. Supp. 3d 1354 (Ct.
Int’l Trade 2023), “stoppers, lids, caps and other closures” of heading 3923 must be closures for use with some type of container or similar article used for packing, supporting, or conveyance of goods only. Thus, these articles would be classified elsewhere.
As these caps and plugs would be considered articles of plastic, and as they are not more specifically provided for elsewhere, the applicable subheading will be 3926.90.9989, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “[o]ther articles of plastics and articles of other materials of headings 3901 to 3914: [o]ther: [o]ther: [o]ther.” The column one, general rate of duty is 5.3 percent ad valorem.
Effective March 4, 2025, pursuant to U.S. Note 2(u) to Subchapter III, Chapter 99, all products of China and Hong Kong as provided for by subheading 9903.01.24, HTSUS, other than products classifiable under subheadings 9903.01.21, 9903.01.22, and 9903.01.23, HTSUS, will be subject to an additional 20 percent ad valorem rate of duty. At the time of entry, you must report the applicable Chapter 99 subheading, i.e., 9903.01.24, in addition to subheading 3926.90.9989, HTSUS, listed above.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355034).