The country of origin of automotive air conditioning filters
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 21, 2025, you requested a country of origin ruling on automotive air filters. Descriptive literature was provided for our review. The items under consideration are described as automotive air filters, which are components of an automotive heating, ventilation, and air conditioning (HVAC) system designed to clean the air entering the vehicle’s interior. The devices filter out dust, pollen, mold, bacteria, and other airborne particles, improving the air quality inside the car.
The filters are usually located behind the glove compartment or under the dashboard. The WT213185TH, WT211166TH-2, and WT212094TH models are rectangular versions of the filter with a frame holding the filtering material in place. The automotive air conditioning filters are assembled in Thailand using components from Thailand and China.
The Chinese components include the impregnated wood pulp fiber base paper, primary filter layer, hot melt adhesive, internal sealing adhesive, polyether polyol, isocyanate, polyester fiber, and packaging including the box and label. The Thai components consist of the filter element, slitted media block, filter media, and the remaining packaging including the outer box, cardboard, and paper angle beads. The assembly process occurs entirely in Thailand and includes eighteen steps.
The process starts with the spray glue composite machine. Hot-melt adhesive is heated and melted in a glue tank, before the machine’s nozzle sprays the adhesive onto the surface of the carbon fabric substrate, i.e., the base material and polyethylene terephthalate (PET) non-woven fabric. It is then bonded to the polypropylene (PP) filter layer that forms the paper filter. After, the composite media is sent to a splitting machine to split the non-woven fabric into proper dimensions.
Next, the filter media is sent through a humidifier which allows high temperature steam to facilitate the media to absorb moisture and soften. After, the media is sent for flow channel shaping using a press roller machine. This process creates reinforcing ribs for the media and distributes it into equal areas. The filter media continues to move onward for internal sealing adhesive injection, where adhesive is added to the edge of the filter to make the adhesive adhere strongly to the surface.
A media pleating machine folds or pleats the filter media for the next step, shaping the filter element by utilizing a cooling channel. Using a slitting knife, a worker manually cuts the media from a three-dimensional filter block into small filter blocks of equal volume. The polyurethane (PU) mold continues onward to the thermostatic oven where it is baked.
Next, the filter media is brought to a two-component adhesive injection machine where A (polyol) and B (isocyanate) PU adhesives are mixed to initiate a chemical reaction to create a strong, durable bond and rigid structure that is used to fix the pleated filter media within the frame. The filter forming process continues with the application of PU foam, element heating, flash trimming, pleating stabilization adhesive injection, and spraying of the data code.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355066).