The country of origin of hydraulic bottle jacks
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the bottle jacks (model numbers JA-BT-1020ST, JA-BT-1030ST, and JA-BT-1050ST), will be China.
Ruling text
In your letter dated October 21, 2025, you requested a country of origin ruling. The subject hydraulic bottle jacks are described as tools with a bottle-like shape for lifting heavy loads. Three model numbers were presented: a 20-ton hydraulic stubby bottle jack, model number JA-BT-1020ST; a 30-ton hydraulic bottle jack, model number JA-BT-1030T; and a 50-ton hydraulic bottle jack, model number JA-BT-1050T. The bottle jacks are functionally the same but will have different lifting capacities.
All of the bottle jacks will be assembled in Thailand using components sourced exclusively from China, including an oil cylinder, pump base, piston rod, handle, handle socket, saddle ram, valves, steel balls, and miscellaneous hardware such as washers, nuts, screws, pins, and O-rings. First, ultrasonic cleaning machines are used to remove any contaminants from the components. Afterwards, the pump base is machined to its final tolerances and holes are drilled into the oil cylinder.
At the next station, the pump base, oil cylinder, and piston rod are welded together, forming the main structure of the jack. To this assembly, the saddle ram along with springs, gaskets, bolts, pins, etc., are incrementally installed using operational steps described as inserting then tightening the components using torque wrenches. Lastly, the bottle jack is tested, painted, and packaged for export.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
CBP has held that whether an assembly process is sufficiently complex to rise to the level of a substantial transformation is determined upon consideration of all the operations that occur within that country, including any subassembly processes that take place in that country. Based on your description of the manufacturing operations, we note that all of the components are sourced from China as finished components in their final form, requiring only assembly operations in Thailand.
Thus, based on the totality of the circumstances, the country of origin of the bottle jacks (model numbers JA-BT-1020ST, JA-BT-1030ST, and JA-BT-1050ST), will be China. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355133).