The country of origin of an automatic upper arm blood pressure monitor
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Based on the totality of the circumstances, we find that the SMT, downloading, and assembly all together constitute a substantial transformation and the country of origin for the subject blood pressure monitor will be Vietnam for duty purposes.
Ruling text
In your letter dated October 22, 2025, you requested a country of origin ruling. The item under consideration is a Fully Automatic Upper Arm Blood Pressure Monitor (Model Number: C02), designed for the indirect measurement of human blood pressure. This device employs the oscillometric method, taking measurements during the inflation phase.
The main unit of the device consists of a Printed Circuit Board Assembly (PCBA Main Board), an LED display screen, an air pump, an exhaust valve, a plastic housing, and various non-critical materials, such as, lens (protects the display screen from scratches and stains), springs, wires, screws, brackets, foam, metal, domes, pump covers, O-rings, tubing, silicone pads, etc. The main unit is packaged with a cuff, a USB-C power cord, a storage bag, and a user’s manual in a retail box.
You summarize the function of the device as follows: Under the control of a Microcontroller Unit (MCU) in the PCBA, the air pump inflates the cuff at a specific rate while the pressure signals are analyzed in real-time. After the results are calculated by the algorithm, the exhaust valve is immediately activated for rapid deflation, and the systolic pressure, diastolic pressure, and pulse rate readings are displayed simultaneously on the LED screen.
The PCBA Main Board, LED display screen, plastic housing, user’s manual, and boxes are produced in Vietnam. The air pump, exhaust valve, cuff, power cord, auxiliary materials, labels and other packaging materials are made in China. The blood pressure monitor device undergoes four key component production and assembly processes in Vietnam: A. PCBA Manufacturing; B. LED Display Manufacturing; C. Housing Injection Molding, and D. Blood Pressure Monitor Final Assembly and Testing.
A. PCBA Main Board Production (Vietnam Factory A): A.1 Main Board SMT: Major electronic components including the, MCU, sensor, fuse, capacitors, resistors, diodes, transistors, USB port, etc., are mounted onto the surface of the PCB using Surface Mount Technology (SMT). Automated Optical Inspection (AOI) equipment checks the placement quality of the post-SMT. A.2 Firmware Burning: Firmware files are burned into the MCU's memory using programming equipment.
A.3 Main Board Testing: Specialized performance test equipment and tools are used to conduct comprehensive performance tests on the finished PCBA Main Board to ensure full functionality. B. LED Display Screen Production (Vietnam Factory A): B.1 Light Board SMT (PCBA): Major electronic components including the resistors, capacitors, LEDs, inductors, ICs, transistors, etc., are mounted onto the surface of the circuit board (PCB) using SMT. AOI equipment checks the placement quality.
B.2 Light Board Processing: The PCBA is assembled onto the LED bracket. After assembly, the combination is placed into a heat staking machine where the fixing posts on the LED bracket are melted and solidified to secure the assembly. A light guide film is then attached to the heat-staked assembly, forming the LED Display Screen.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355175).