The country of origin of a pool cleaning robot
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 24, 2025, you requested a country of origin ruling on a pool cleaning robot. Descriptive literature was provided for our review. The item under consideration is described as the iGarden K60 cordless, smart robotic pool cleaner designed for both floors and walls up to the waterline. It features a powerful engine with brushless motors, two rubber brushes, a large 4-liter filter basket, and a 6-hour runtime.
The device has artificial intelligence (AI) navigation with an S-shaped path planning for up to 95% coverage, remote control via app, and automatic parking. Debris is collected using the onboard canister. The device contains parts from both Thailand and China. The Thai parts include the control board, impeller, chassis, charging fixing plate, and motor.
The Chinese components include the foam, socket cover, screws, battery, O-ring, nylon, front and rear covers, charging wire cover plate, nuts, water sensor, shave strip, gear, brackets, side and decorative covers, drain cover, decorative covers, basket covers, tail pillar, bearings, seal ring, isolation column, motor bracket, power supply knob, snap buttons, various additional brackets, the IMU board, interaction board, adapter board, driving board, motor fixing plate, oil seal, rollers, shaft, magnet, gaskets, wheel hub, and the machine body and handle shell.
The manufacturing includes a total of four steps. The first step includes the manufacture of the various subassemblies, which occurs in China. This includes screwing and gluing the motor subassembly, water pump motor subassembly, control box subassembly, charging cable subassembly, charging plug subassembly, and the battery subassembly together. The processing is then transferred to Thailand where the main printed circuit board assemblies (PCBA) are created using surface mount technology.
The main control board includes a microcontroller (MCU), which is the core component that acts as the “central brain” of the robot vacuum. This is responsible for running pre-set programs and processing all data signals. The WiFi module enables device networking and remote communication, capable of receiving cloud commands or transmitting data with external devices (such as mobile phones or computers). It supports remote control and data synchronization.
The power management module is responsible for distributing and stabilizing the power supply to the entire unit. It converts battery or external power into appropriate voltages for various components (e.g., 3.3V/5V for the MCU and sensors). It also includes overvoltage and overcurrent protection to ensure safe system operation.
Finally, the sensor analog-to-digital signal processing module receives analog signals from external sensors (such as distance sensors, temperature sensors) and converts them into digital signals recognizable by the MCU, providing environmental data support for decision-making. The second board is the driver board, which acts as a “bridge” between the MCU and the actuators, its core function is to convert the low-power control signals output by the main control board into high-power drive signals.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355237).