The tariff classification of plastic parts of the Penumbra ENGINE® Aspiration Source and Canister from China and Malaysia
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 28, 2025, you requested a tariff classification ruling. Additional information was provided by email dated November 18 and November 19, 2025. The Penumbra ENGINE® consists of a Penumbra ENGINE® Aspiration Source and a disposable Penumbra ENGINE® Canister. The Penumbra ENGINE® is a key component of the Penumbra System, used for vacuum aspiration of thrombus in neurovascular procedures.
The canister is an essential part of the Penumbra ENGINE® and forms the vacuum collection reservoir where aspirated material is stored. The products under consideration are five custom-made plastic components of the Penumbra ENGINE® Aspiration Source and the Penumbra ENGINE® Canister. The Top Plastic Enclosure, Middle Plastic Enclosure, and Bottom Plastic Enclosure are components of the Penumbra ENGINE® Aspiration Source.
The Main Plastic Canister Enclosure and Top Plastic Canister Enclosure form the Penumbra ENGINE® Canister. The Top Plastic Enclosure is the upper housing shell of the Penumbra ENGINE® Aspiration Source. It is an elongated-oval external shell with gently curved edges and a hollow interior. The front section includes a recessed semi-cylindrical cavity that creates a curved cut-out along the oval contour. This cavity is designed so that the upper portion of the canister enclosure seats securely within it.
The Top Plastic Enclosure features a single integrated push-button switch located on the upper surface and a small indicator-light zone for vacuum-status illumination. It forms the upper exterior of the Penumbra ENGINE® Aspiration Source housing and protects internal mechanical and electronic components. It does not include any aspiration pathway connections. The Middle Plastic Enclosure forms the mid-body of the Penumbra ENGINE® Aspiration Source.
It has an elongated-oval outer shape aligned with the top enclosure, including a front semi-cylindrical hollow where the main canister sits. It has a hollow interior designed to surround the internal vacuum pump and electronic modules, and internal vertical reinforcement ribs for structural rigidity. The Middle Plastic Enclosure features precision alignment points and interlocking edges to connect with the top and bottom enclosures.
It serves as the central structural frame of the Penumbra ENGINE® Aspiration Source, maintaining alignment and providing mid-section protection. The Bottom Plastic Enclosure forms the lower structural base of the Penumbra ENGINE® Aspiration Source. It mirrors the elongated-oval geometry of the top and middle enclosures, including a matching semi-cylindrical cavity along the front to cradle the bottom portion of the canister enclosure.
It has a reinforced internal base plate designed to support the vacuum pump and lower electronic modules, and internal mounting points for the mechanical components. The Bottom Plastic Enclosure features mechanical interface and locking edges that mate with the Middle Plastic Enclosure, and provides stable structural support for the assembled unit. It houses and supports the lower portion of the ENGINE’s pump and electronics, and provides mechanical stability.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355355).