The country of origin of valves
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 29, 2025, you requested a country of origin ruling on valves. A description of the assembly processes was provided in the submission. The items at issue are referred to as a 2-inch lined ball valve, part number 6H3010, and a 6-inch lined butterfly valve, part number: 889508A. The ball valve is comprised of a body and a flange that primarily house a stemmed ball, seals, a steel cover and a lever.
The butterfly valve is comprised of a disc, an O-ring, a washer, a seal ring, and a liner within a valve body that consists of upper and lower halves. Both valves are primarily constructed of ductile iron. Some components of the valves are coated with Perfluoro-alkoxy (PFA) material to prevent corrosion and harsh treatments that result from being in contact with liquid or gases.
With respect to the ball valve, you explain the final assembly occurs in Hungary using a body, a flange and a stemmed ball sourced from India. Prior to the final assembly, the body, flange and stemmed ball are cleaned and sand-blasted in Hungary. Then, these components are pre-heated and subjected to injection and transfer modeling processes to coat the components with PFA material. Afterwards, the body, flange, and ball are deburred and painted.
During the final assembly, a ball and a German seat are inserted into a valve body, and a flange is placed over the ball and screwed in place. Next, a seal from India is placed onto the ball stem, and then a steel cover from Hungary and a lever are installed onto the valve. Finally, the valve undergoes inspections, testing and is packaged. The butterfly valve is also assembled in Hungary using a valve body from China and other components from Hungary, the Czech Republic and China.
Prior to the final assembly, a valve body is machined to form mounting bores that allow the valve to be positioned with pipes. Next, a liner, and a disc from China are coated with PFA material. Once the coating process is complete, a deburring process occurs. Afterwards, a seal ring from the Czech Republic and a disc are inserted into a lower valve body. An upper body is then positioned onto the lower body and bolted in place.
Subsequently, a spacer from Hungary, O-rings from Germany, a wedge ring from Hungary and a washer from Germany are installed onto the upper section of the valve body. During the assembly steps, lubrication is applied. Once the valve is complete and undergoes inspections and testing, a dust cover ring is placed onto the valve. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355399).