The country of origin of hockey skate inserts
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letters dated October 27, 2025, and November 6, 2025, you requested a country of origin ruling on hockey skate inserts. A description of the merchandise including its use, material composition, manufacturing process, and a website designation was submitted with your first letter. The country of origin of the materials and a sample accompanied your second letter.
The item, identified as POWERFOOT Performance Inserts, available in two sizes, are shaped rubber/plastic inserts that adhere to the inside of hockey boot uppers over the toes to improve the fit. Each retail box contains two cushions and two shims. Each cushion is composed of a layer of black polyethylene foam measuring approximately 1/8th inch thick, a layer of grey open-cell foam measuring ¼ inch thick, a blue polyester fabric, and a covered adhesive strip.
The shims, used if additional thickness is required, are made up of open cell foam rubber/plastic measuring 1/16th inch and covered adhesive. The POWERFOOT Performance Inserts are manufactured in Canada. Rolls of blue poly fabric, grey open-cell foam rubber/plastic and black polyethylene foam, all originating in Canada, are laminated together, pinched, and cut into individual inserts. The thin shims are made from cut outs of polyethylene.
Adhesive and strips originating in the United States are applied to the inserts and shims before they are retail packaged in small hanging boxes.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A. 297, 302 (1940).
Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States. Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the “country of origin” within the meaning of the marking laws and regulations.
Pursuant to section 102.0, interim regulations, related to the marking rules, tariff-rate quotas, and other USMCA provisions, published in the Federal Register on July 6, 2021 (86 FR 35566), the rules set forth in sections 102.1 through 102.18 and 102.20 determine the country of origin for marking purposes with respect to goods imported from Canada and Mexico.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355835).