The country of origin of Gigabyte monitors
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 10, 2025, on behalf of your client Gigabyte Technology Co. Ltd, you requested a country of origin ruling determination. The merchandise under consideration is Gigabyte monitors, model number M27UP, which are primarily used for gaming. This 27-inch color monitor has a UHD (3840 x 2160) resolution with a 160Hz (FHD 320Hz) refresh rate. It has the following connectors: 2x HDMI 2.1, 1x USB Type-C, 1x DisplayPort (DP) 1.4, 3x USB 3.0, USB Type-B, and headphone jack.
The manufacturing process of the main printed circuit board assembly (PCBA) takes place in Thailand. This process involves affixing approximately 800 electronic components, such as the processor integrated circuit (IC), the high-definition media interface, the EEPROM, the display port, flash memory, and UxSB devices, to a bare printed circuit board (PCB) through the surface mount technology (SMT) process. After the completion of the main PCBA, firmware is loaded onto the PCBA.
This process results in a finished main PCBA performing the basic functionality of the monitor, including receiving, decoding, and processing the video and audio signals and converting them into a signal for display on the monitor's panel. The power PCBA is also manufactured in Thailand. The process entails affixing approximately 80 electronic components to a bare PCB using SMT. Lastly, the PCBAs are tested for quality assurance in Thailand and then shipped to China for final assembly.
In China, the final assembly and testing occur. First, the liquid crystal display module (LCM) is manufactured. Then, the assembly of the finished computer monitor takes place, which consists of fastening (screwing) the various components and subassemblies into the chassis and connecting cables between the mechanisms. Lastly, the complete computer monitor is tested in China and shipped to the United States.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article. Congressional intent in enacting 19 U.S.C.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355930).