The country of origin of drains, a connector, and an evacuator
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin for Item# 110065A2461ET will be Israel.
- Accordingly, the country of origin for both items will be Israel.
- The country of origin of this item will be the United States.
Ruling text
In your letter dated November 12, 2025, on behalf of your client, Degania Medical Devices Pvt., Ltd, you requested a country of origin ruling on three drains, a connector, and an evacuator, which function in a closed wound drainage system. Additional information was provided via various emails.
Item# 110065A2461ET (Round Drain W/O Trocar) is a 24 French, hubless, Blake fluted round drain consisting of a silicone drain tube with four channels along the sides and a blue radiopaque stripe along the length of the tube, and an adapter. The adapter is made in the United States.
Item# 110065C1961ET (Round Drain with Trocar) is 19 French, hubless, Blake fluted round drain consisting of a silicone drain tube with four channels along the sides and a blue radiopaque stripe along the length of the tube, an adapter, and a bendable trocar. The adapter and trocar are made in the United States. Item# 111040B0761ET (Flat Drain with Trocar): is a flat, 3/4 fluted, 7mm, Blake drain consisting of a radiopaque flat silicone drain tube with four channels along both sides, an adapter, a hub, and a trocar.
The flat drain is channelled along either 75% or 100% of its length. The adapter and trocar are made in the United States. The hub is made in Israel. Item# 11902661ET (Blake Cardio Connector) is a plastic connector used to connect drains with a suction d evice (Evacuator). It is made in the United States. Item# 31300661ET (Evacuator) consists of a silicone bulb, non-return valve, a bulb plug, a locking ring, and a bulb cap. It acts as a suction device to collect unwanted fluid, blood, or puss.
The bulb is made in India. The bulb plug, non-return valve, locking ring, and bulb cap are made in Israel. These items are individually packed and supplied non-sterile from India. The manufacturing process for the first three items generally includes the following stages: Production in Israel: Radiopaque strips material and silicon main material are fed into separate extruders and then radiopaque material is embedded in the silicon raw material through the extrusion die in Israel.
The channels are formed along the length of tube through extrusion dies during the extrusion process in Israel. The complete tubes are exported to India. Production in India: Cutting: The tubes are cut to precise lengths manually. Component Assembly: Trocars (where applicable) are manually glued to the drain tubes using specialized adhesives. Hubs are manually attached to flat drains.
Curing and Stabilization: Assembled components undergo curing by holding for a certain period of time under clean room environment to stabilize adhesives and ensure structural integrity. Curing times and temperatures are tightly controlled to meet medical device standards. Cleaning and Surface Treatment: Products are cleaned with IPA (Iso propyl Alcohol) to remove residues and particulates. Surface treatments include ink-based DOT markings, which serve as a reference for catheter placement at the surgical site.
Packaging and Labeling: Each unit is individually packed in sterile or non-sterile pouches depending on customer requirements.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N355983).