The country of origin of a hose reel system
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 14, 2025, you requested a country of origin ruling on a hose reel system. The products under consideration are SKU#’s 83753 and 83754. They are described as steel hose reels incorporating plastic hoses. The hoses are constructed of a predominantly plastic mixture containing some nitrile rubber. Each unit consists of either a 3/8-inch or ½-inch air hose mounted on an automatic steel rewind reel.
These assemblies are commonly used in vehicle maintenance and industrial facilities for delivering pressurized air to tools and equipment. The reels and the hoses are manufactured in Cambodia from Chinese origin raw materials and hardware according to the following steps: Hose manufacturing steps: The Chinese origin raw materials are placed into a granule producing machine to uniformly mix the raw materials and create uniform granules suitable for extrusion.
The mixed granules are fed into an extrusion line where it is heated and forced through a die to produce the hose to a specific diameter and wall thickness. The hose then passes through a winding machine where it is reinforced with polyester. Mixed granules are fed into an extrusion line where they will be heated and forced through a die to create the hose’s outer cover. The fully formed hose passes through a printing station to be labeled with name, specifications and compliance markings.
Cut hoses are fed into a coiling machine that rolls them into compact, uniform coils. After coiling is completed, the hose is stored until the hose reel assembly process. Steel hose reel manufacturing steps: Small steel plates are fed into a cutting machine to be sliced into precise dimensions for components (arms and axis). Large steel plates are processed using a heavy-duty cutting machine to create a steel blank to be used in the stamping process.
Steel plates designated for the hose reel spool are shaped into a cylindrical form using a curling machine. Steel components for the reel’s arms and base are bent into their final shapes using a bending machine. A stamping machine is used to press steel plates into specific reel shapes finalizing the mechanical form of the reel components. After stamping, all steel parts are sent to the powder coating area for surface finishing.
All stamped and shaped steel parts are thoroughly cleaned to remove dirt, oil residue and metal shavings. Cleaned parts are hung to allow full exposure of all surfaces during coating and curing. Powder coating, sourced from China, is applied using an electrostatic spray gun creating a durable, corrosion-resistant and aesthetically pleasing finish. Coated parts are placed in a curing oven where temperatures typically range from 180°C to 200°C (356°F to 392°F).
The heat melts and fuses the powder into a smooth, hard coating. After curing, parts are removed from the oven and hung to cool naturally. Once cooled the parts are ready for final assembly into the complete hose reel system Hose reel assembly steps: Brass or steel fittings are attached to the ends of the hose. The fittings are inserted and then secured using a crimping machine.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356042).