The country of origin of LED lighting systems
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 13, 2025, on behalf of Beta-Calco, you requested a country of origin ruling on LED lighting fixtures for purposes of applying current trade remedies. The merchandise at issue is identified as LED lighting systems, which include the Linear (Tunnel Pendant Continuous), Decorative (Oooh Quad) and Exterior (Sentinel). You state that the three lighting systems at issue consist of the same components with only minor changes based on customer specifications.
You present the following manufacturing process for the LED lighting systems, in which the lighting systems are assembled in Canada from components sourced from the United States, Canada, and elsewhere, with each LED light product being built to order for the customer: The LED PCBAs (Printed Circuit Board Assemblies), which include the circuitry and LED diodes (light sources), are manufactured in the United States using SMT (Surface Mount Technology).
The LED drivers are produced in Mexico, the United States, or China, and will be programed in Canada or the United States. The LED lighting system assembly operations in Canada are described as follows: 1. Lighting Fixture Frame Manufacture Tunnel Pendant Continuous Linear Lighting: a piece of extruded aluminum is cut to the customer-specified length. Oooh Quad Decorative Lighting: Similar to theTunnel Pendant Continuous Linear Lighting, extruded aluminum is cut to size.
However, since the Oooh Quad decorative lighting has a non-linear square configuration, four pieces are welded together to achieve the desired design. Sentinel Exterior Lighting: The frame for the Sentinel exterior lighting is die-cast outside of Canada and imported into Canada pre-made. 2. Frame Processing Additional processing is performed on the linear and decorative frames based on customer specifications.
This includes drilling holes to facilitate the attachment of components such as the driver, LED panel, and reflectors. For the Sentinel exterior lighting, certain elements are secured with adhesive. 3. Frame Painting The frames are painted using a paint line system, which involves cleaning the frame of impurities, painting in an automated spray booth, and curing the paint. 4. End Cap Assembly for Exterior and Linear Lighting Systems A bracket is attached to an end cap plate using a screw and washer.
The assembled end cap plate is then secured to the frame with screws. 5. Driver Installation The driver is affixed to the frame using a washer and screw. 6. Reflector and LED panel assembly The reflector and LED panels are joined using clips. A bracket is then secured to the top of the reflector and LED panel using screws and washers. The assembled unit is then attached to the frame using the brackets. 7. Diffuser A diffuser is snapped into place on the exterior of the frame to cover the LED and reflector panel. 8.
Optional Uplight Installation Certain products include an uplight, which is an additional LED panel secured to the top of the frame with brackets and washers. 9. Optional Assembly for Extended Lengths For linear lighting fixtures exceeding four feet in length, multiple sections are joined using brackets and screws.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356144).