The country of origin of an electrosurgical patient return electrode
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 17, 2025, on behalf of your client, Medico Electrodes International Limited, you requested a country of origin ruling on an electrosurgical patient return electrode (also called electrosurgical dispersive electrode, electrosurgical neutral electrode, patient return electrode, or a grounding pad). The submitted samples have been reviewed and will be disposed of.
In your submission, you describe a scenario where an electrosurgical patient return electrode (the “Article”) is assembled in India from five components, all of which are manufactured and sourced from various countries. An electrosurgical patient return electrode is a single-use, non-sterile, disposable component used with electrosurgical generators during surgery.
Electrosurgery is a surgical technique that uses high-frequency electrical currents to cut, remove, or destroy tissue and to control bleeding during various medical procedures. The Article’s function is to safely return high-frequency current from the patient’s body back to the generator, dispersing it over a large contact area to prevent burns or tissue injury. The electrode consists of five distinct layers of materials.
These are (1) a release liner (also called mylar or protective cover), (2) hydrogel (conductive gel), (3) dielectric ink (some versions may not include this), (4) aluminum foil backed with a polyethylene foam pad, (5) an adhesive carrier (adhesive on a foam roll). The aluminum foil and the hydrogel are the conductive layers. The component parts used to produce the finished Article in India are described, in part, as follows: Release Liner.
The release liner is a polyester film coated with silicone that protects the hydrogel surface until use, ensuring the pad remains sterile and easy to handle. In terms of composition, it is made of PET coated with silicone. Composition: PET plastic coated with silicone. Country of Source Material: EU. Country Where Manufactured: Italy. Details of Manufacturing Operation Performed: PET sheets are coated with silicone in order to make the sheets non-sticking. Hydrogel.
The hydrogel is a polymerized, water-rich conductive gel that adheres the pad securely to the patient’s skin and provides a low-impedance interface essential for safe current return during surgery. In terms of composition, it's made of glycerin, water, thickener, polymers and conductivity enhancement chemicals. It is one of the critical components of the electrode. Composition: Glycerin, water, thickener, polymers and conductivity enhancement chemicals.
Country of Source Material: UK County Where Manufactured: UK Details of Manufacturing Operation: The ingredients are mixed in documented manner in accordance with proprietary formula in specialized equipment leading to a ultra-low impedance formulation that is stable when cured state after exposure to UV lights. Dielectric Ink. The dielectric ink is not used in all models of electrosurgical electrodes. Its main purpose is to enhance the performance of current distribution.
In terms of composition, it is dielectric particles suspended in an ink. Composition: Dielectric particles suspended in ink. Country of Sourced Material: USA.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356150).