The tariff classification of robotic platforms from China
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated November 17, 2025, you requested a tariff classification ruling. The merchandise in question consists of four robotic platforms manufactured by AgiBot in China. The robots are programmable, embodied-intelligence robotic systems incorporating mechanical actuators, control processors, sensors, and AI-based software enabling autonomous or semi-autonomous operation. AgiBot A2 Ultra is a full-size humanoid robot approximately measuring 169 cm tall and weighing 69 kg, with 40 degrees of freedom.
It features bipedal locomotion, articulated limbs, speech and vision-based interaction, and operates untethered using rechargeable lithium batteries. As imported, it will include a robot body, onboard computing, depth cameras, LiDAR, IMU, torque sensors, battery pack, battery charger, accessory charger, microphone, and a remote controller. AgiBot X2 Ultra is mid-size humanoid research robot approximately 130 cm tall and weighing 35 kg.
As imported, it will includes a robot body, a battery charger, accessory charger, microphone, battery charger, accessory charger, and a remote controller. AgiBot D1 Ultra is a quadruped (robot dog) robotic platform measuring approximately 630 × 360 × 415 mm. This robot supports an 8–10 kg payload, carries sealed electronics rated to IP54, and reaches speeds up to 3.7 m/s. It uses electric servo actuation, dynamic stabilization, and onboard navigation to traverse uneven terrain.
As imported, it will include a robot body, battery pack, battery charger, and a remote controller. AgiBot D1 Edu is a smaller quadruped robot measuring approximately 680 × 370 × 406 mm and weighing about 15 kg. It shares core mechanics with the D1 Ultra but is simplified for academic/educational instruction. As imported, it will include a development kit and simulation tools for STEM and AI training. It includes a robot body, battery pack, battery charger, and a remote controller.
All four robots are imported with embedded firmware and core control software. Regarding the software, the robots run (1) embedded real-time/motion-control software (actuator control, gait, balance, safety); (2) perception & navigation software (camera/LiDAR processing, where equipped); and (3) human-interaction software (voice/mic, vision-based recognition, scripted behaviors). This software is stored on-board in the robot’s internal computing/control system.
All the robots can be programmed and customized for the user’s needs, supporting configuration and/or secondary development. The robots perform embedded onboard data processing only as required to operate as robots: sensor processing (vision/LiDAR where applicable), motion control, navigation, interaction logic, and safety monitoring. In your submission you state that the robots will not be used by Faraday Future for commercial purposes.
Rather, you indicate that the company will only use these robots for demonstration, presentation, reception and tour-guide scenarios for visiting guests and partners, helping explain vehicle concepts and technologies in an engaging and interactive manner, as well as illustrating robotics, AI, and motion-control principles.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356154).