The country of origin of an idler assembly
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the idler assembly, part number 14797201, will be South Korea.
Ruling text
In your letter dated November 17, 2025, you requested a country of origin ruling on behalf of your client, Hyundai Minuteness Co., Ltd. The merchandise under consideration is referred to as an idler assembly, part number 14797201, and is described as an assembly used in the undercarriage of an excavator. It is composed of an idler wheel and a recoil spring subassembly. The idler wheel guides the track so that it can rotate continuously. The recoil spring assembly absorbs any shocks when the excavator is in motion.
The idler assembly is assembled in South Korea using a process that is broken down into preassembling an idler wheel subassembly, preassembling a recoil spring subassembly, and final assembly. All of the components are manufactured in South Korea except for an idler rod, which is described as the central shaft of the idler wheel subassembly. The idler rod is sourced from China. The idler wheel subassembly requires the Chinese idler rod, an idler shell, brackets, bushings, pins, seals, and O-rings.
The idler shell, described as a cylindrical body, is cast in Korea then machined to its final tolerances using turning, drilling, and tapping operations. Separately, the brackets are forged from steel materials and machined to their final specifications in Korea. Afterwards, the individual components are combined using an assembly sequence that involves cleaning and inspecting each item, pressing the bushings and seals into the idler shell, and using pins to secure the brackets to the shell.
The recoil spring subassembly requires a rod, a spring, a yoke, a stop plate, a spacer, a bracket, and a nut. The yoke and bracket are forged from steel, then machined to their final tolerances. The rod, spacer, and nut are cut from steel bars then brought to a machining center where they are shaped using a turning process. Lastly, the individual components are fitted together, secured using screws and washers, and the subassembly is painted.
Final assembly involves securing the idler wheel subassembly to the recoil spring subassembly using pins, screws, and washers. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Based upon your description of the manufacturing operations, we note that the only foreign component is a Chinese idler rod that accounts for less than three percent of the value of the finished assembly.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356156).