The tariff classification of polyether ether ketone pellets, plates, rods and filament from Germany
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 6.1 percent ad valorem.
- The applicable subheading for part number 99157352, VESTAKEEP® i4 3DF PEEK monofilament will be 3916.90.3000, HTSUS, which provides for monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: of other plastics: other: monofilament.
- The general rate of duty will be 6.5 percent ad valorem.
Ruling text
In your letter dated November 19, 2025, you requested a tariff classification ruling on behalf of your client, Evonik Corporation. Part numbers 99019857 / 99019855, VESTAKEEP® i2 G PA5 / VESTAKEEP® i4 G TIN1 are polyether ether ketone (PEEK) resins (CAS number 29658-26-2) in pellet form. The pellets are used for injection molding and extrusion. They will be used to manufacture the plates, rods and monofilament. Part number 99157352, VESTAKEEP® i4 3DF is a monofilament extruded from PEEK base polymers.
The diameter of the filament is 1.75 mm. It is used to 3D print implantable devices such as spinal cages and craniomaxillofacial implants. Part number 99025837, VESTAKEEP® SRi5 is a stock shaped rod manufactured from PEEK base polymers. The rods are imported in dimensions of 36 mm diameter by 1.5 meters in length. They will be used in the manufacture of medical devices, such as surgical heart valve rings. Part number 99159673, VESTAKEEP® i4 PL is a stock shaped plate extruded from PEEK base polymers.
The plates are rigid with square corners and are imported in typical dimensions of 1000 mm by 500 mm by 40 mm. The plates are used to create medical devices, such as craniofacial implants.
The applicable subheading for part numbers 99019857 / 99019855, VESTAKEEP® i2 G PA5 / VESTAKEEP® i4 G TIN1 base PEEK polymers will be 3911.90.2500, Harmonized Tariff Schedule of the United States (HTSUS), which provides for petroleum resins, coumarone-indene resins, polyterpenes, polysulfides, polysulfones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms: other: other: containing monomer units which are aromatic or modified aromatic, or which are obtained, derived or manufactured in whole or in part therefrom: thermoplastic: other.
The general rate of duty will be 6.1 percent ad valorem. The applicable subheading for part number 99157352, VESTAKEEP® i4 3DF PEEK monofilament will be 3916.90.3000, HTSUS, which provides for monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: of other plastics: other: monofilament. The general rate of duty will be 6.5 percent ad valorem.
The applicable subheading for part number 99025837, VESTAKEEP® SRi5 PEEK rods will be 3916.90.50 00, HTSUS, which provides for monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: of other plastics: other: other. The general rate of duty will be 5.8 percent ad valorem.
The applicable subheading for part number 99159673, VESTAKEEP® i4 PL PEEK plates will be 3920.99.5000, HTSUS which provides for other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials: of other plastics: of other plastics: other. The general rate of duty will be 5.8 percent ad valorem.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356246).