The tariff classification and country of origin of an electric scissor lift
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the electric scissor lift, model number 140-XEN, will be China in both scenarios described above.
Ruling text
In your letter dated November 19, 2025, you requested a tariff classification and country of origin determination ruling. The merchandise under consideration is identified as an electric scissor lift, model number 140-XEN, and is described as a self-propelled electric scissor lift used to lift personnel or materials. Its main components include a platform, a mobile base, and a lift mechanism with crisscrossed beams.
The unit has a working height of 13.8 meters and measures approximately 2.48 meters in length, 1.15 meters in width, and 2.05 meters in height. It can reach speeds up to 3.5 kilometers per hour and has a gradability rating of 25 percent.
The applicable subheading for the electric scissor lift, model number 140-XEN, will be 8427.10.8020, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Fork-lift trucks; other works trucks fitted with lifting or handling equipment: Self-propelled trucks powered by an electric motor: Other: Operator riding: Aerial work platforms of a kind described in statistical note 4 to this chapter.” The general rate of duty will be free. Two manufacturing scenarios were proposed in your submission.
In the first scenario, the scissor lift will be assembled in Thailand using components sourced entirely from China. The process begins with assembling the platform assembly, which involves mounting the left and right guardrails onto a metal platform, installing a side door, and adding a brake pedal assembly. Separately, workers assemble the main lifting mechanism (also referred to as the scissor arm assembly).
The process involves joining a series of inner and outer arms at various pivot points to form an assembly with a crisscrossed pattern and then incorporating upper and lower lifting cylinders. Wrenches and allen keys are used to assemble both the platform and the scissor arm assemblies. In a separate section, workers assemble the chassis subassembly, a process that centers around installing components to a structural frame.
The operational steps are described as installing the mounting points (e.g., latches and brackets), attaching the motor and steering mechanisms to the brackets, securing them in place using fasteners, and installing mechanical linkages. Afterwards, workers install anti-tipping bars, brakes, a fuel tank, a pump motor, a valve assembly, a battery, a charger, and a counterweight. At this point, the subassembly is ready for work to begin on the electrical system.
The assembly procedure is described as attaching the main controller, installing speakers, mounting electrical connectors, adding switches and sensors, and completing the wiring. The tools used in this section are identified as metric wrenches, allen keys, pliers, and screwdrivers. Final assembly involves lifting the scissor arm assembly, securing it to the chassis assembly, installing a valve block, and routing hoses and electrical cables.
Afterwards, the platform assembly is lifted and attached to the scissor arm assembly. In the last section, workers inspect, calibrate, and test the scissor lift.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356251).