The country of origin of Disposable Ag/AgCl Cup electrodes
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Since the U.S.-made Ag/AgCl cup doesn't change its nature, name, or use after being processed in Indonesia, the country of origin of the Technomed’s finished disposable cup electrodes will be the United States for origin and marking purposes at the time of importation into the United States.
Ruling text
In your letter dated November 20, 2025, you requested a country of origin ruling on Disposable Ag/AgCl Cup electrodes on behalf of your client, Technomed USA, Inc. The merchandise at issue is Technomed’s Disposable Ag/AgCl cup electrode, a single-use medical device used to measure bioelectrical signals from the body, typically in clinical and research settings. Common applications include monitoring electroencephalography (EEG), Polysomnography (PSG), and Evoked Potentials (EP).
They are called “cup” electrodes because of their small concave shape that holds a bit of conductive gel or paste (applied at use), ensuring good skin contact and signal conduction. The Ag/AgCl material provides a stable and low-noise electrical interface between the skin and recording equipment. The disposable nature of the electrode simplifies application, maintains consistent signal quality, and the risk of cross-contamination. There are five components of the electrode: 1.
Ag/AgCl cup – a non-polarized sensor made of 20% glass-filled ABS plastic, and plated with either silver (Ag) or chloritized with Silver Chloride (AgCl). It is made in the Unites States. 1. Crimp tube – made of tin (Sn) plated copper (Cu)-a metal sleeve crimped to the end of stranded wire to prevent fraying and provide the electrical connection. It is made in the Netherlands. 1. Heat shrink tubing – a plastic sleeve which when heated, shrinks tightly around the wire providing isolation and protection.
It is made in China. 1. Lead wires – Tin-plated copper wires coated with PVC 85A sheathing to provide electrical conductivity from the Ag/AgCl cup to the connector. It is made in South Korea. 1. 1. Connector – 0.5 mm connector socket (compatible with EEG systems) designed in accordance with EC53:2013 / DIN 42802 standards, featuring an overmolded construction made from medical-grade PVC with a hardness rating of 85A. It is made in South Korea.
The assembly of the Disposable Ag/AgCl cup electrode occurs both in South Korea and Indonesia. In South Korea, the lead wire and the DIN 42802 connector are overmolded together through injection molding. The lead wire and connector assembly is then sent to Indonesia for further processing. In Indonesia, a piece of shrink tubing is first slid onto the lead wire far enough to leave the stripped section uncovered. A crimp tube is slid over the stripped end of the wire until it reaches the insulation.
Next, the stem of the U.S.-origin Ag/AgCl cup is inserted into the crimp tube until it contacts the lead wire. The subassembly is then placed in the lower crimp die with the cup positioned securely in the cup holder. The crimping tool's handle is pushed down all the way, crimping the ferrule bootlace. This action permanently joins the lead wire to the Ag/AgCl cup. Then, the shrink tube is attached over the ferrule bootlace by heat shrinking. After that, the product is inspected, cleaned, and packaged.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356289).