The country of origin of an electric bicycle (e-bike)
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated December 1, 2025, you requested a country of origin ruling on an e-bike, on behalf of Segway Inc. The item under consideration has been identified as a Segway e-bike, model TDM004Z. You have posed two manufacturing scenarios, the only difference between the two being the country where the frame is painted. You provided both diagrams and a comprehensive video showing the manufacturing and final assembly processes.
In scenario 1, the following components of the frame are sourced from and are manufactured in Cambodia: Right and Left Chain stay Right and Left Seat stay Seat Tube Down Tube, and Head Tube The remaining frame components originate from China, some of which consist of: Brake Cable Threading Guide Bottom Bracket Fender Screw Nut Rack Screw Nut Water Bottle Screw Nut Cable Clip Chain stay Support Rod Welding Plate Chain stay Support Rod Right/Left Dropout Seat Tube Seat Tube Upper Reinforcement Plate Segway, in Cambodia, performs the following processes: Complete frame welding Grinding Polishing Heat treatment Correcting deformities (that may occur during welding) Heat treatment and Painting the frame The finished frame is sent to China where final assembly of the e-bike takes place.
In both scenarios, the following manufacturing steps take place in Cambodia during the frame production stage. The raw material is: Cut Beveled Chamfered Deburred Bent (Chain stay and Seat stay) Shaped (Down tube) CNC Machined and turned Ground Polished Heat treated Welded Ribs are welded inside the down tube Scenario 2 is identical to Scenario 1 with the exception of the frame being painted in China. Using a welding machine, the head tube and down tube are welded together, forming the head tube assembly.
The down tube, bottom bracket, and seat tube are welded to form the front triangle. The chain stays are welded to the bottom bracket. The seat stays are welded to the chain stays and seat tube. Finishing operations include reaming pre-drilled holes, drilling and tapping, inspection, and calibration.
This is followed by the Post-Welding Processing, which includes: Mill the lower chain stay to shape its arc as required Heat the frame in a furnace to reduce hardness and enhance corrosion resistance Apply a solvent coating and bake the frame Remove surface dents using thorium supplementation. The frame is then sent to China.
The remaining components of the e-bike are assembled to the frame in China, including the fork, seat post, saddle, handlebars, motor, battery, controller, throttle, torque sensor, brakes, electrical components, wire harness, wheels, and tires. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356544).