The country of origin of an audio interface device
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin for the ISA C8X as presented in all three scenarios, will be Malaysia.
Ruling text
In your letter dated December 2, 2025, you requested a country of origin ruling on behalf of your client, Focusrite Group US, Inc. The merchandise under consideration is identified as the ISA C8X and is described as an input signal amplifier audio interface. The subject device is further described as an analog microphone preamplifier and signal converter for professional music recording and production. The interface is comprised of multiple printed circuit board assemblies (PCBAs) within an enclosure.
The front of the device is equipped with various knobs, buttons, sliders, and LED displays, which function together as the user interface for the device. The back of the device incorporates various audio inputs and outputs for the connection of microphones, speakers, and other audio input devices. The subject device is designed to function as an interface between the user’s computer and various audio inputs for music production, processing, and mixing.
The device converts the analog sound from the input into digital form, making it accessible to alter with the computer. The device can further convert the digital signal back to analog for audio output. In your request, you note that there are three primary PCBAs, which provide the necessary functions of the device. The Main PCBA contains the analog/digital conversion functions as well as the digital signal processing architecture.
The Preamp PCBA contains the ISA preamp electronics as well as various microphone preamplifiers. The final PCBA is the Front Panel PCBA, which contains the LEDs as well as the control and user interface electronics. Based on the information provided, the Main PCBA functions as the essential component of the finished device. You propose three manufacturing scenarios for the interface device, upon which you would like this office to review. In scenario one, the Main PCBA is manufactured and programmed in Malaysia.
The process includes the placement of the various electronic components, including the converter circuits and digital signal processor, on the board via surface mount technology (SMT). The finished PCBA is then sent to China where the Preamp PCBA and Front Panel PCBA are manufactured via SMT procedures. The three PCBAs are then assembled within the enclosure before the finished device is tested, inspected, and packaged for shipment to the United States.
The second scenario begins with both the Main PCBA and Preamp PCBA being manufactured, via the same SMT operation described above, in Malaysia. The two PCBAs are then sent to China where they are combined with the Front Panel PCBA, which in this case is manufactured in China, and installed within the enclosure. The finished device is then tested, inspected, and packaged for shipment to the United States.
The final scenario begins with all three PCBAs (Main, Preamp, and Front Panel) being manufactured via SMT processes in Malaysia. All three PCBAs are then sent to China where they are assembled within the final enclosure. The finished device is then tested, inspected, and packaged for shipment to the United States.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356637).