The country of origin of a cutting chisel
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated December 2, 2025, on behalf of Betek GmbH & Co. KG, you requested a country of origin determination for purposes of Section 301 duties and IEEPA tariffs. Pictures and descriptions of the manufacturing processes were included in your submission. The merchandise under consideration is identified as a cutting chisel. The imported tool is primarily comprised of five components: the steel body, a tungsten carbide tip, brazing, a clamping sleeve and a wear plate.
The chisel is an essential part of a cold milling machine used for surface treatments of roads with the purpose of removing asphalt layers while allowing for the reuse of the milled material. The chisel is the part of the machine that penetrates and cuts the material layer by layer from the road surface. Multiple chisels are used on one cold milling machine. In operation, each chisel is mounted into individual holders that are welded onto the rotating milling drum of the machine.
The chisels can be ejected and replaced when needed. You have stated that manufacturing process for the chisel will occur in Germany using parts and components from local German partners, sourcing only the tungsten carbide tip from China. The manufacturing process begins with cold forging steel in Germany into the raw steel body and machining it to exact technical specifications. Specifically, the base of the body is machined to fit precisely into the holder on the cold milling machine.
In addition, a hole is precision-drilled in the top of the steel body to accommodate the carbide tip. The remaining steps of the production of the finished chisel are also performed in Germany. The tungsten carbide must be sandblasted in preparation for the brazing process. The chisel body is also sandblasted and then washed to remove oil residue and rust protection that was applied for transport. After sandblasting and washing, the machined steel body is ready for brazing.
It is loaded into the brazing machine, together with brazing and soldering material. The tungsten carbide tip is then placed on the forged seat of the steel body, and both are brazed together using a specialized mixture, all of which originate from Germany or another EU member country. Subsequently, the chisel is again sandblasted to remove any scaling that may have built up from the brazing process. The wear plate and clamping sleeve, which are also made in Germany, are then affixed to the steel body.
The finished chisel is then reviewed for quality control, packaged, and shipped to the United States. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356661).