The tariff classification and applicability of 9802.00.60 to cartridge cups, projectile cups, and cartridge strip manufactured from scrap gathered in the United States, processed in India, and returned to the United States for further processing
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- At the time of import into the U.S. the copper strip that has a thickness of 5 mm or more will be 7409.21.0010, HTSUS, which provides for “Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: Of copper-zinc base alloys (brass): In coils: Of a thickness of 5 mm or more.” The general rate of duty will be 1.9 percent ad valorem.
- The copper strip that has a thickness of less than 1.6 mm will be 7409.21.0075, HTSUS, which provides for “Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: Of copper-zinc base alloys (brass): In coils: Of a thickness of less than 5 mm: Of a width of less than 500 mm: Of a thickness less than 1.6 mm.” The general rate of duty will be 1.9 percent ad valorem.
- The copper strip that has a thickness between 1.6 mm and less than 5 mm will be 7409.21.0090, HTSUS, which provides for “Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: Of copper-zinc base alloys (brass): In coils: Of a thickness of less than 5 mm: Of a width of less than 500 mm: Other.” The general rate of duty will be 1.9 percent ad valorem.
Ruling text
In your letter dated December 4, 2025, you requested a tariff classification ruling. Specifically, you seek a determination as to whether certain cartridge cups, projectile cups, and cartridge strip from India qualifies for a reduction in duty under subheading 9802.00.60, Harmonized Tariff Schedule of the United States (HTSUS). The first items under consideration are described as unfinished cartridge case cups which are cylindrical, solid pieces of metal less than the height of a finished cartridge case.
After importation, the unfinished cartridge case cups will be manufactured into finished cartridge cases for use in ammunition of all calibers in accordance with military specifications and custom designs. You state that the subject cups are brass, consisting of 70 percent copper and 30 percent zinc. The unfinished cartridge case cups will be manufactured in India from U.S.-origin copper scrap.
Specifically, discs are stamped from flat-rolled sheets and then shaped by a drawing machine into a bowl or cup-like configuration. When imported into the U.S., the cartridge cups will range from 10 millimeters (mm) to 105 mm in length and 4 mm to 31 mm in diameter. In addition, the thickness of the cup wall will range from less than 1 mm to 10 mm.
The next items under consideration are described as unfinished cartridge projectile cups which are cylindrical, solid pieces of metal less than the height of a finished cartridge projectile. After importation, the unfinished cartridge projectile cups will be manufactured into cartridge projectiles for use in ammunition of all calibers in accordance with military specifications and custom designs. You state that the subject projectile cups consist of 60-99 percent copper and 1-40 percent zinc.
The unfinished cartridge projectile cups will be manufactured in India from U.S.-origin copper scrap. Specifically, discs are stamped from flat-rolled sheets and then shaped by a drawing machine into a bowl or cup-like configuration. When imported into the U.S., the projectile cups will range from 5 mm to 65 mm in length and 4 mm to 31 mm in diameter. Furthermore, the thickness of the cup wall will range from less than 1 mm to 10 mm.
The final item under consideration is described as unfinished copper strip that ranges in width from 50 mm to 450 mm and ranges from 0.5 mm to 6 mm in thickness. The strip is manufactured in India from U.S.-origin copper scrap. After the U.S. origin scrap is manufactured into copper strip in India, it is imported into the U.S. in coils and is further processed into cartridge projectiles.
The applicable subheading for the unfinished cartridge case cups will be 9306.30.8000, HTSUS, which provides for “Bombs, grenades torpedoes, mines, missiles and similar munitions of war and parts thereof; cartridges and other ammunition and projectiles and parts thereof, including shot and cartridgewads: Other cartridges and parts thereof: Other.” The general rate of duty will be Free.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356727).