The country of origin of a flat panel display module
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated December 10, 2025, on behalf of your client Innolux Corporation, you requested a country-of-origin ruling. The merchandise under consideration is a display module, identified as N160JCA-E5M, which is a 16-inch thin film transistor (TFT) Liquid Crystal Display (LCD) NB module with a light-emitting diodes (LED) backlight unit and 30-pin embedded display port (eDP) interface.
As per the information provided, in its imported condition, this module cannot convert a video signal and is designed to be incorporated into a laptop after importation. The TFT LCD panel N35cell is manufactured in Taiwan. The production of the TFT LCD panel cell starts with array processing, including film deposition, photolithography, etching, TFT and pixel electrode formation, testing, and cleaning.
Next, the color filter coating (RGB), exposure, and development occur, followed by cell processing (pre-PI cleaning, photo alignment, filling, and sealing). The finished TFT-LCD panel cell is then shipped to China. In China, the module assembly process takes place to form the complete flat panel display module.
This process includes chip on glass (COG) bonding, outer lead bonding (OLB), printed circuit board (PCB) bonding, dispensing, PCB inspection, backlight assembly, module assembly, function check, surface pressuring, auto check optimum VCOM voltage, aging test, specification application programming, dimension check, dimension application programming interface, quality control, packing, serial number verification, etc. Once the final assembly process is completed, the module is shipped to the United States.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Based on the facts presented, it is our opinion that the completed TFT-LCD cells, regardless of where they are cut to size, are the dominant components that provide the character of the finished flat-panel display modules.
The end use of the subject merchandise is predetermined by the complex manufacturing process performed in Taiwan, as they cannot be used for any other purpose than a display. Further, the assembly processes performed in China would not substantially transform the cells into new and different articles of commerce with a name, character, and use distinct from that of the exported good. Accordingly, the country of origin of this TFT-LCD module is Taiwan.
The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N356911).