The country of origin of pliers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated December 17, 2025, you requested a country of origin ruling on a 4.5" mini end cutting pliers and two 4.5" mini diagonal cutting pliers. Pictures of the tools in different stages of manufacture were included with your submission, along with a narrative of the manufacturing process. Mini end cutting pliers have small jaws positioned perpendicularly to the handles that are designed for making clean, semi-flush cuts on soft wires.
They are made of two pieces of steel, with each piece providing half of the handle and half of the working end. When joined together, the joint provides a fulcrum that transfers and increases the force applied to the handles by the user to the working end. Mini diagonal pliers are small pliers used for cutting wire. They are made of two pieces of steel, with each piece providing half of the handle and half of the working end.
The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or “on a diagonal.” The jaw edges are ground to a symmetrical “V” shape, and they cut by indenting and wedging the wire apart. You have stated that the manufacturing process will be the same for the three pliers. The manufacturing process for the three pliers involves drop-forging alloy steel rods in Thailand into the shape and form of the two halves of the pliers (i.e., the pieces incorporating the handles and jaws).
They are further trimmed and punched before being sent to China, where they are drilled with holes for assembly and the cutting jaws are milled. Subsequently, the two halves are assembled by a rivet machine and then heat treated and polished. Finally, the handles are coated in plastic, the pliers are laser marked with a logo and then packaged for retail sale.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357114).