The country of origin of wire harnesses
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated December 17, 2025, you requested a country of origin ruling on behalf of your client WRWP, LLC. The merchandise under consideration, identified by part numbers 725-14625 and 725-18878, are described as wire harnesses specifically designed for a zero-turn riding lawnmower. The two harnesses are described as identical except for the final positioning of certain electrical components.
The subject harnesses are comprised of a group of insulated conductor wires bundled together and covered with plastic tubing and terminated at the various ends with an assortment of connectors. The subject harness is used to electrically connect the battery, engine, hour meter, electric power take-off system (PTO), and the various switches in the lawn mower.
The wire harnesses incorporate multiple relays and other electrical components for protection from short circuits and allow current to flow and activate the electric PTO to engage the mowing blades. In your request, you state that the manufacturing process for both harnesses begins with the sourcing of insulated wires which are manufactured in the United States.
These U.S. originating wires are exported to China, where they are cut to varying lengths and the wire ends are stripped to prepare for the addition of the connectors and terminals. Wire junctions are spliced and heat shrinkable sleeving is applied to the spliced junctions, terminals, and/or wire bundles. Tape, harness covering wire ties, and/or clips are applied and harness covering tubing is slipped onto the wire harnesses.
Relays and other additional electrical components are attached to the harnesses, then a visual inspection takes place to verify proper dimensions and presence of required components. Labels are applied and the finished wire harnesses are packed into cartons for shipping to the United States. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Regarding the origin of the subject wire harnesses, it is the opinion of this office that cable conductor, which originates in the U.S., imparts the character of the finished article as they are the functional components of the harnesses.
Additionally, the work done in China, including cutting the wire, adding connectors and terminals, and adding components to the harnesses, does not substantially transform the cables into new and different articles of commerce with a name, character, and use distinct from the individual components.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357149).