The country of origin of a power bank
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated December 17, 2025, you requested a country of origin ruling on behalf of your client, Elecom USA, Inc. The merchandise under consideration is identified as a lithium-ion power bank, model number DE-C35L-5000N, with a nominal voltage of 3.6 VDC, a nominal capacity of 5,000 mAh, and a maximum power output of 12 Watts. The power bank has a hard outer case with a built-in carabiner, a stand, a power button, a USB-C port, and LED indicators.
The power bank is assembled in Vietnam using components sourced from China and Vietnam. The Vietnamese inputs are identified as a USB cable and packaging material. All of the remaining materials and components are sourced from China, which include the battery cell, the printed circuit board assembly (PCBA), the outer shells, and other electrical components.
The assembly process begins with soldering a thermistor and wires to the PCBA, inspecting the connections, and performing a series of tests to verify the input voltage, output voltage, and standby power consumption. At the next station, a 21700 cylindrical lithium-ion battery cell is wrapped in insulation and placed in a plastic battery holder. The battery cell, PCBA, and a graphene pad are glued to a bottom shell using silicone adhesive.
The wires from the PCBA are spot welded to the battery cell and then insulated using heat-shrink tubing. A metal stand and a metal carabiner are also secured to the bottom shell using screws. At the last station, a middle frame (described as a plastic shell with an opening for the USB-C port, power button, and a light guide), an O-ring (for waterproofing the internal components), and an upper shell are pressed onto the bottom shell.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357156).