The country of origin of a fingertip pulse oximeter
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Based on the totality of the circumstances, we find that the SMT, downloading, and assembly, taken together, constitute a substantial transformation and the country of origin for the subject fingertip pulse oximeter will be Vietnam for marking and duty purposes.
Ruling text
In your letter dated January 6, 2026, you requested a country of origin ruling on a fingertip pulse oximeter on behalf of your client, Choice MMed America. Additional information was provided via email dated January 21 and January 23, 2026. OxyWatch C1F Fingertip Pulse Oximeter is a handheld, battery-powered device intended for checking blood oxygen saturation and the pulse rate of users. It has a digital display that shows an individual’s SpO2 level and pulse rate.
The main components of the device are a power supply printed circuit board assembly (“PCBA”), a blood oxygen PCBA, a housing, and an LCD screen.
Raw materials for the production of the fingertip pulse oximeter are sourced from China, including unpopulated (“bare”) printed circuit boards (PCBs), electronic components (resistors, capacitors, IC, crystal oscillators, etc.), screens, structural materials (injection-molded housings, springs, lenses, back adhesives, etc.), and packaging materials (packaging boxes, manuals, back stickers, etc.). Description of the manufacturing process in Vietnam: 1).
Perform the SMT (Surface Mount Technology) mounting processing on unpopulated (“bare”) Power PCBs and Blood oxygen PCBs; 2). Perform SN code laser engraving for subsequent circuit board traceability; 3). Print solder paste onto the PCB through a printing machine, and detect the quality of solder paste printing using an SPI (Solder Paste Inspection) device; 4). Use a chip mounter to mount components, then cure the components and solder paste through a reflow oven; 5).
After completion, conduct AOI (Automated Optical Inspection) to ensure the components mounting effect and no mounting defects; 6). For power boards, further process by welding springs; 7) Inspect and separate boards; 8). For oximeter boards, after they pass AOI(Automated Optical Inspection), they undergo corresponding product inspections before being put into production; 9). Assembly of the oximeter; During the assembly process, first, the factory will program the power supply PCBA and blood oxygen PCBA.
Then they will complete the screen welding process and finally fix the screen. Next, they will thread the power board FPC wire through the middle shell and weld it to the power board. They will then fix the lower shell, completing the installation of electrode pads and hanging springs with the power board. Subsequently, they will fasten the middle shell and lower shell together and complete the hanging springs and upper and lower rubber pad operations.
After installing the upper shell and lens, they will test the product's performance. Once the test passes, they will conduct an appearance inspection and then hand over the product to the quality inspector for verification. 10). Packaging operations after passing quality inspection; and 11). Print the corresponding labels according to the order requirements and complete the packaging operations. The finished product will be exported from Vietnam to the United States.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357572).