The country of origin of a housed bearing
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, as the origin of the insert bearing and the outer housing is Thailand, the country of origin of the product, an insert bearing with a housing, will be Thailand.
Ruling text
In your letter dated January 7, 2026, you requested a country of origin ruling on behalf of SWC Bearings Technology Co., Ltd. The product at issue is part number 701.SCP205-16-GA.41.4GEN, referred to as an insert bearing with a housing. The product, which is specifically engineered for use in the material handling industry, is comprised of a cast iron housing that incorporates a ball bearing, seals, shields, set screws, an oil cap and an anti- rotation pin.
The bearing is designed to withstand radial and axial loads and consists of spherically shaped races and caged balls. The housing, which features two mounting holes, functions as an external structure that supports the installation and operational positioning of the bearing. The anti-rotation pin prevents rotational displacement of the outer ring relative to the bearing housing, and the seals and shields prevent ingress of external contaminants.
With regard to origin, you explain the product is assembled in Thailand using components sourced from Thailand and China. Prior to the final assembly process, a Thai-sourced housing blank undergoes additional processing in Thailand. It is painted, milled, machined, bored and turned to form oil nozzle holes, and then afterwards, deburred, touched up with paint and cleaned.
Also, Chinese manufactured rings, intended to be used as races, are imported into Thailand in a semi-finished state, where the rings undergo superfinishing processes that establish the required tolerances of roughness, parallelism and circularity, in which the rings will afterwards feature ultra smooth surfaces measured in millionths of inches to function as races with precision raceways.
The superfinishing processes consist of three phases of grinding in which the surface roughness is enhanced by approximately 75 to 89 percent, and a cessation process in which the circular deviation is improved by 41 to 45 percent. Once the superfinishing processes are complete, the rings undergo ultrasonic cleaning. During the final assembly process, an oil nipple and a cage sourced from China are assembled and installed into the housing.
Grease is injected through the oil cap; seals are pressed in place and set screws are installed. Next, a cage sourced from China is riveted, demagnetized and cleaned. Afterwards, balls sourced from China are inserted into the cage. Then, the inner and outer races, caged balls and shields are manually pressed into the housing, an anti-rotation pin is set, and final inspections are completed.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters (HQ) Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357580).