The tariff classification of glass fiber reinforced resin fins from Italy
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 4.2 percent, ad valorem.
Ruling text
In your letter dated January 9, 2026, you requested a tariff classification ruling on behalf of CMC Marine Corp. The articles under consideration are glass fiber reinforced resin fins, series HS40, HS160, LR70, LR250, and STAB40, which are used in three fin stabilizer systems: the HS system for all hull shapes, the LR system for displacement or semi-displacement yachts, and the STAB for compact applications. All fins are made of 70 percent Crystic resin, 25 percent glass fibers, and 5 percent steel.
The HS40 is 8.6 square feet (sq. ft.); the HS160 is 32 sq. ft.; the LR70 is 18 sq. ft.; LR is 75 sq. ft.; and STAB40 is 16 sq. ft. You state that the fins are imported as stand-alone, finished products without the electric actuators, nor any other part controlling the fins.
They are used as stabilizing fins (part of an electronic stabilization system) on a yacht’s hull and are instrumental in reducing the roll of the waves and countering weather effects impacting a yacht’s movement; thereby providing stability, efficiency, and safety. The fins are designed to incorporate a flange to accept an electronic actuator that controls the fin. The fins and the actuators are attached to the sides of a vessel’s hull.
The applicable subheading for the glass fiber reinforced resin fins, series HS40, HS160, LR70, LR250, and STAB40, will be 3926.90.3000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Other articles of plastics and articles of other materials of headings 3901 to 3914: Other: Parts for yachts or pleasure boats of heading 8903; parts of canoes, racing shells, pneumatic craft and pleasure boats which are not of a type designed to be principally used with motors or sails.
The general rate of duty will be 4.2 percent, ad valorem. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein.
This includes, but is not limited to, tariffs and other duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the classification stated above, the merchandise covered by this ruling may also need to be reported with either the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions covering exceptions to such tariffs.
For further information to assist with the importation process, please refer to the frequently updated Cargo Systems Messaging Service (CSMS) messages at https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and Frequently Asked Questions on the Trade Remedy/IEEPA page at https://www.cbp.gov/trade/programs-administration/trade-remedies/IEEPA-FAQ. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357679).