The country of origin of wired earbuds
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- As such, the country of origin of the finished White and Black Basic 28E05 Wired Earbuds will be Vietnam.
Ruling text
In your letter dated January 10, 2026, you requested a country of origin ruling on wired earbuds on behalf of your client, Sakar International, Inc. The item concerned is referred to as Basic 28E05 Wired Earbuds. These are wired earbuds that incorporate two earbuds/speakers at one end of a length of cable and an audio plug at the opposite end. The cable is manufactured in a “Y” configuration which allows the correct stereo signal to be delivered to each of the user’s ears.
These particular earbuds come in two colors, white and black. The assembly process for both color earbuds is the same.
Several components are manufactured in China: audio plug (jack) silicone caps polyurethane enameled wire (cable raw material) packaging materials The remaining components are manufactured in Vietnam: speaker wire (cable) manufacturing speaker case PVC material (cable raw material) The Chinese components/materials are sent to Vietnam, where they and the components of Vietnamese origin are manufactured into the finished earbud assemblies.
Within Vietnam, the electrical audio cable is manufactured from the raw enameled wire, PVC material, and an audio plug. The raw enameled wire is cut to length and covered with a PVC jacketing. Then the jacketed wires are arranged into their final “Y” shaped configuration and covered with an outer cable jacketing. The audio plug is soldered to the cable assembly and then over molded to created a finished audio plug assembly.
The intersection of the “Y” or “Y-split” is reinforced with an additional molded piece to give strength to the cable and enhance durability. After the cable assembly is completed, the cable is tested. Next, the cable assembly is manufactured to the finished commodity by assembling it with the remaining components. The speakers are soldered onto the cable, then their housings and silicon earbud pads are added. The final assembly is then tested again and packed for export to the United States.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Based on the facts presented, it is the opinion of this office that the character of the finished wired earbuds is imparted by the Vietnamese origin speakers, which would be considered the dominant component.
Additionally, the cable manufacture and final assembly process is also undertaken in Vietnam. As such, the country of origin of the finished White and Black Basic 28E05 Wired Earbuds will be Vietnam.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357685).