The Country of Origin of 7 iron golf club heads finished in China
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
This is in response to your letter dated January 13, 2026, requesting a country of origin determination on behalf of your client, Cobra Golf Incorporated. A description of the manufacturing processes of 7 iron golf club heads was submitted for our review.
The merchandise under consideration concerns three models of golf club heads imported by Cobra Golf Inc., which are identified as the following: Item Number Item Name HD0A01R7 HD IR 3DPT SV BK RH MNS 7 STD HD0B01R7 HD IR 3DPM SV BK RH MNS 7 STD HD0C01R7 HD IR 3DPX SV BK RH MNS 7 STD According to the information that you have provided in your letter, the manufacturing process for all three golf club heads occurs in Vietnam through a process called “3D Printing” with a CAD (Computer-Aided Design).
The manufacturing process performed in Vietnam: Direct Metal Laser Sintering (3D Printing) Process 1. CAD File Preparation – Cobra Golf develops a 3D CAD model of the golf club iron head and send the design to the factory in Vietnam. The factory adjusts the model and adds processing stock and any supporting structure required for the 3D printing of the golf club iron head.
The 3D CAD model is then converted to a Stereo Lithography (STL) file which “slices” the golf club iron head model’s geometry into thin layers. 2. 2. Machine Setup – The factory loads the Chinese origin stainless-steel metal powder, (316 SS/316L) into the 3D printing machine, and the chamber is filled with an inert gas (argon or nitrogen typically) to avoid oxidation. 3. Powder Layer Deposition – The 3D printing machine deposits and spreads a thin layer of the metal power across the build tray. 4.
Laser Scanning and Melting – A high powered laser selectively melts the metal powder per the sliced geometry created from the STL file, which then solidifies. 5. Repetition – Steps 4 and 5 are repeated, thin layer by layer, until the AP golf club iron head is complete. 6. Cooling and Removal – The AP golf club iron head cools inside the 3D printing machine to prevent warping and reduce the amount of thermal stress.
The golf club head is then removed by either a wire Electrical Discharge Machine (EDM) or band saw. 7. Post – Processing – any of the supporting structure used during the build that is not intended as part of the finished product is removed, typically via machining. The AP iron head consists of a body made of 316L stainless steel, along with two “caps” that are installed on the heel and toe of the AP Iron head’s sole to cover the pockets that accept two MIM tungsten pieces at 18g/cm3 density.
There is also a MIM tungsten piece installed in the hosel bore at 9g/cm3 density. Subsequently, the raw AP golf club iron head and caps will be shipped from Vietnam to China for post 3D printed processing and finishing. The finishing operations performed in China: 1. The China finishing factory receives the AP head and caps from Vietnam and installs two tungsten pieces that it manufactures into the AP head’s heel and toe pockets. It covers the pockets with the two matching AP caps provided by the Vietnam factory.
The China factory then welds the two caps to the AP head to secure the tungsten. 2.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357746).