The country of origin of a heat gun
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, in view of these facts, and based on the totality of the circumstances, the country of origin of the subject heat gun will be Thailand.
Ruling text
In your letter dated January 14, 2026, you requested a country of origin ruling. The merchandise under consideration is identified as a Kobalt 12.5-amp heat gun, which was also the subject of New York ruling N328954, dated November 15, 2022. Moving forward, the subject heat gun will be made using a second manufacturing scenario and imported under SKU 5208257_202601.
In New York ruling N328954, the heat gun was assembled in Thailand with the following components of Chinese origin: an electric motor, a printed circuit board assembly (PCBA), a fan, an electrical switch, a power cord, a knob, a back cover, a motor support, a heat insulator, wiring, support rings, and fasteners.
In the new scenario, the heat gun will incorporate a greater number of Thai components, including a heating element, an electric motor, a PCBA, a fan, a temperature adjustment knob, a power cord, a back cover, and the outer shells. Electrical switches, terminal blocks, wires, and various fasteners will continue to be sourced from China. Final assembly will occur in Thailand and begins with the assembly of the heating element and electric motor.
The heating element is assembled by winding a wire around a steel core fitted with ceramic pipes, inserting the core into a metal tube insulated with mica sheets, and soldering a safety fuse. The process continues with assembling the rotor assembly for the electric motor. This involves stamping laminations out of silicon steel sheets, stacking the laminations onto a shaft, applying a coating of insulating material, and heat treating the assembly inside a furnace.
Afterwards, a worker presses a commutator onto the shaft and winds a wire around the lamination core. A stator assembly is produced by pressing a bearing into a housing, gluing a magnetic shoe and a spring to the housing, and magnetizing the assembly. To complete the motor, a worker presses the rotor assembly into the stator assembly and secures a rear cover assembly (composed of a metal cover, rubber cover, carbon brush holder, carbon brush, and spherical bearing).
Final assembly involves attaching the fan to the motor, soldering the wiring from the heating element to the switch, connecting the motor to the PCBA, mounting the PCBA and motor in the rear shell, securing the power cord, installing the temperature knob, attaching the front nozzle, and fastening the front shell. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357771).