The country of origin of dishwashers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated January 14, 2026, you requested a country of origin ruling on dishwashers. Descriptive literature was provided for our review. The items under consideration are described as High Polaris Dishwashers (models WQP12-5901K-US, WQP12-59M6-US, WQP12-5909V-US, WQP12-5909W-US, and WQP12-59E1-US). These built-in household dishwashers are designed to fit under kitchen counters and clean tableware using hot water, detergent, and rotating spray arms.
Each unit is sold as a complete packaged system and incorporates four primary subassemblies: the inner tub (the main washing chamber), the chassis (structural framework for mechanical and electrical components), the upper and lower baskets (for secure dish placement), and the air breather (which regulates air pressure in the water line). In Egypt, manufacturing is executed by integrating locally sourced elements with parts sourced from China.
The Egyptian-origin components include the connecting board, lower basket, steel wire, cutlery basket, lampstand, float seat, float shrapnel, floater, back board, tub middle plate, stiffeners, sealing frame, angle plate, upper back support, base tray cover, lower sprayer assembly, lower sprayer shaft, air breather, snap ring, connector, middle sprayer pipe, upper sprayer, and the upper basket.
Conversely, the Chinese-origin components include absorbent cotton, screws, galvanized sheet, gaskets, brackets, plastic powder, modified plastic particles, clamps, caps, pipes, control panel, stickers, display printed circuit board (PCB), door lock, filter handle, handle box, induction pump, valves, junction box, main control panel, wire harness, switches, pins, sealing rings, plastic sleeves, rail support, rope pulley, valve covers, wheel, and waterproof silicone pad.
The first of five stages in the process includes the injection molding, which produces key plastic components such as sprayer parts, float assemblies, the cutlery basket, connectors, and support structures. Polypropylene and color masterbatch are dried, mixed, injected into molds, cooled, trimmed, and inspected before mass production proceeds. The second stage involves metal stamping.
Steel coil sheets are used to form the outer door and side panels through cutting, drawing, punching, flanging, and shaping, after which damping material is applied and cured. Stainless steel plates undergo similar processes to create the inner door, tub middle plate, and back board, while the sealing frame is shaped using a forming machine. Additional components such as stiffeners, connecting boards, and angle plates are produced by a third-party vendor through precision stamping and are inspected for quality.
The third stage is subassembly production. The inner tub subassembly is created through bending, riveting, welding, sealing, and curing, with stiffeners, sealing frames, hinge supports, and guide rails added during assembly. The upper and lower baskets are hydroformed, spot-welded, powder-coated, and fitted with rollers, spray arms, and a cutlery rack.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357811).