The country of origin of dishwashers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, the country of origin of the A3 Dishwashers will be Egypt, which is where the substantial assembly and manufacturing processing is performed.
Ruling text
In your letter dated January 14, 2026, you requested a country of origin ruling on dishwashers. Descriptive literature was provided for our review. The items under consideration are described as A3 Dishwashers (models WQP12-67E1 and WQP12-6708E). These built-in commercial dishwashers are designed to fit under kitchen counters and clean tableware using hot water, detergent, and rotating spray arms.
Each unit is sold as a complete packaged system and incorporates five primary subassemblies: the inner tub (the main washing chamber), the base tray (collects water and supports damage and pump system), the upper and lower baskets (for secure dish placement), the water cup (regulates water intake and distribution between washing), and the air breather (which regulates air pressure in the water line). Manufacturing is carried out in Egypt using components sourced from Egypt and China.
The Egyptian components include the outer door, inner door, inner tub top plate, inner tub middle plate, inner tub base plate, sealing frame, stiffener assembly, right and left stiffener, base tray, water cup, diversion block, air breather upper and lower plates, junction box cover, base tray cover, right and left side panels, top and lower spray arms, cutlery assembly, lower, upper and cutlery basket, activity row, upper sprayer assembly, connectors, snap ring, pipes, upper sprayer, and bottle wash arm.
The Chinese components include the control panel cover, control panel, handle, stainless steel sheet, dispenser, hinges, brackets, absorbent cotton, rail assembly, tub damping, door lock, seals, heating tube assembly, galvanized steel sheet, hinge holders, filter, modified plastic particles, check valves, sump cover, induction and drain pumps, inlet valve, hooks, pressure switch, polypropylene, flowmeter, printed circuit board (PCB) box and covers, float seat, float, pipes, main control panel, wire harness, adjust feet, worm wheel, poles, gear box, screws, adjustable baseboard, springs, rope, wire, cutlery wheel, plastic powder, and basket wheel.
The first of five stages in the process is the injection molding, which produces key plastic components such as the water cup, base tray, air breather, base tray cover, cutlery basket, cutlery tray, and spray arm. Polypropylene and color masterbatch are dried, mixed, injected into molds, cooled, trimmed, and inspected before mass production proceeds.
The second stage, metal stamping, begins with steel coil sheets being cut, drawn, punched, flanged, and shaped to form the outer door and side panels, followed by the application and curing of damping material. Stainless steel plates undergo similar processes to create the inner door, tub middle plate, and back board. The sealing frame is shaped using a forming machine.
Additionally, galvanized steel from a third-party vendor is precision stamped to produce components such as stiffeners, the upper sprayer, junction box, and junction box cover assembly, all of which undergo quality inspection. The third stage, subassembly production, involves the creation of several key components.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357813).