The tariff classification and country of origin of fracking units
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated January 19, 2026, you requested a tariff classification on behalf of your client, Jereh Energy Equipment and Technologies Corporation. You also request a country of origin determination for the purpose of marking, and Section 301 trade remedies, and other duties. The products at issue are referred to as Trailer Mounted Intelligent Electrical Fracking (TMEF) Units, model numbers YLT105-5600E, YLT95-5600E, and YLT105-6000E.
Each unit is a trailer equipped with an electrically powered Quintuplex Plunger Pump assembly, a power assembly, high- and low-pressure assemblies, a lubrication system, a power-end lubrication assembly, a medium-voltage drive assembly, a variable-frequency drive assembly, an electrical cabinet and a control assembly. Once powered by an electric grid or a Power2Go gas turbine generator set, these assemblies work together to pump various types of fluids used for oil and gas fracturing operations.
The TMEF units are differentiated by their temperature thresholds, working pressures and power output. The plunger pump assembly consists of a Quintuplex plunger pump (power and fluid ends and a reducer), a return oil pipe and a cover plate assembly. The pump, which is configured as a reciprocating positive displacement pump pressurizes the low and medium pressure water supplies and then delivers the water through a designated manifold.
The power assembly consists of an oil cooler pre-assembly, a drive shaft, a medium-voltage motor, and other power assembly components. Its function is to transmit power from the motor to the plunger pump via a drive shaft. The high-pressure assembly consists of a pressure sensor, a hose bracket, a wing nut and a male plug. The low-pressure assembly consists of lubrication pipe, a cast manifold, a hose bracket, an accumulator and a u-type liquid inlet.
Together, the components convey the low-pressure water supply to the plunger pump. The packing lubrication assembly consists of a lubrication pump and hose connections. The function of the assembly is to lubricate the five-way packing of the plunger pump. The power-end lubrication assembly is driven by a motor that powers two double pumps, which provide lubrication for the bearings and gears inside the power end of the plunger pump.
The gear pumps suction lube oil from the oil tank through suction oil filters and then deliver oil to the plunger pump via pipelines. The medium voltage drive assembly is used for electrical frequency conversion and voltage transformation to satisfy the needs of power supply scenarios. The variable frequency drive assembly consists of five outdoor units that are used to control the actuation and speed control of the lubrication motor.
The electrical cabinet houses all electrical controls for the TMEF unit, including sensors, sensor cables, main motor power cables, lubrication motor power cables and other components.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N357930).