The country of origin of valves
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated January 23, 2026, you requested a country of origin ruling on valves. A description of the assembly processes was provided in the submission. The four items under consideration are manually actuated valves. The valves feature a lever or a wheel and are used to control the flow of water in plumbing fixtures, such as toilets, faucets, etc. The valves will be assembled in Thailand using components from China and Thailand.
With respect to item one, the full port ball valve, the assembly process begins by manually assembling a seat from China and a ball from Thailand into a brass valve body that was forged and machined in Thailand. Following that, a cap from Thailand is installed. Next, packing from Thailand and an O-ring, a packing nut, and a stem from China are press fit into place. Finally, a handle sourced from China is secured to the valve using a nut and lock washer. The finished valve is subjected to inspections and testing.
The assembly of the second valve, the straight stop, begins by inserting a ball seat and compression bonnet from China into a valve body forged and machined in Thailand. A quarter-turn valve stem and O-ring are then installed through the top of the valve body. At that point, the compression bonnet and compression sleeve are secured in place using a compression nut. In the last step, a plastic handle from China is screwed onto the valve.
The assembly of the third valve, an angle stop designed to turn 90 degrees, begins by inserting an O-ring, a ball seat and a ball from China into a brass body forged and machined in Thailand. Next, a valve stem and an O-ring from China are installed into the valve body through its top. A compression sleeve and compression nut from China are connected using a nut and positioned in place. A stop handle from China is then secured onto the valve using a screw.
The assembly of the fourth item, a ceramic disc press angle stop, begins by inserting a Chinese-sourced cartridge valve, which is a complete valve comprised of a pressure-containing shell with a closure element and seats, into a brass valve body that is forged and machined in Thailand. After that, an O-ring from China is installed to prevent leaks. A compression sleeve and compression nut from China are installed and a stop handle from China is attached to the top of the angle stop body.
Finally, the valve is subjected to inspections and testing, and a stop handle from China is attached to the top of the angle stop body. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358157).