The country of origin of packaged LED chips
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, since a substantial transformation does not occur as a result of the Chinese manufacturing/assembly process, the country of origin of the packaged LED chips will be Germany for purposes of marking and applying current trade remedies.
Ruling text
In your letter dated January 29, 2026, on behalf of your client, the OSRAM GmbH (“OSRAM”), you requested a country of origin ruling on packaged LED chips for purposes of marking and applying current trade remedies. The packaged LED chips are imported and used in lighting products in the United States for various industries including automobiles. Regardless of the particular SKU, all products are processed in the same fashion.
First, a wafer (which can be produced in various countries) undergoes “front-end” processing at OSRAM’s facility in Germany. These operations produce LED chips that are subsequently sent to another facility in China for “back-end” processing. You state that the back-end operations are relatively simple compared to the front-end procedures and serve, in essence, only to install the LED chip into a housing that, in turn, can connect to the product in which it will be installed (e.g., a car headlight).
The front-end processing involves both “Active Structuring” and “Passive Structuring”. The “Active Structuring” entails the following operations: deposition, resist coating and exposure, developing, etching, and resist strip. These steps include a number of manufacturing and chemical reactions that significantly change the wafer. The “Passive Structuring”, which occurs after Active Structuring, includes the following steps: resist coating and exposure, resist developing, metal deposition, and resist strip.
The intermediary products at the end of these stages are LED chips. The back-end processing packages the LED chips into the finished packaged LED products. The purpose of the LED packaging during the back-end process provides the interconnecting interface to the customer application, chip interconnect and electrical wiring, and more (e.g. laser marking, singulation, etc.).
You elaborate the frontend (in Germany) and the backend (in China) operations as follows: FRONT-END PRODUCTION PROCESSES (IN GERMANY) A. Front-End Production: Active Structuring Active Structuring process takes place in Germany. Active Structuring is the first step in the front-end processing. Deposition Deposition is the first operation necessary to produce the LED chip and involves adding thin films of material onto a semiconductor wafer.
These films can be conductive, insulating, or semiconducting, depending on the device requirements.
Common deposition methods include those listed below; Osram will use a combination of these methods depending on the desired color of the finished LED chip (e.g., red light, clear light, etc.) · Chemical Vapor Deposition (CVD): Uses reactive gases at high temperatures to form solid layers. · Physical Vapor Deposition (PVD): Atoms are ejected from a target material and deposited onto the wafer. · Atomic Layer Deposition (ALD): Offers precise control for ultra-thin layers, ideal for advanced nodes.
These layers form the foundation for subsequent patterning and etching steps, enabling the creation of transistors, capacitors, and other microstructures. Resist Coating and Exposure This next step involves applying a light-sensitive polymer (photoresist) onto the wafer using spin coating.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358355).