The country of origin of nickel-titanium (NiTi) alloy stents
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated January 30, 2026, on behalf of your client, Confluent Medical Technologies (“CMT”), you requested a country of origin ruling on nickel-titanium (NiTi) alloy stents for purposes of the applicability of reciprocal tariffs. Additional information was provided via email dated February 12, and February 13, 2026. You describe the processing of the stent as follows: 1. Nickel and Titanium are melted and formed into bars by a manufacturer in the U.S. 2.
The bar is gun drilled into a Tube Hollow by CMT in the United States and then exported to the supplier’s facility in either Germany or Costa Rica. 3. In Germany, Costa Rica, or the United States, the Tube Hollow is drawn into tubing by running several passes through machines that elongate the tube, and the process also reduces the diameter and wall thickness. Sometimes there is grinding or surface treatment to remove oxide and make it look shiny (the “Degreasing” step).
The tubes undergo full annealing between the multiple drawing passes to make it formable again. The tube is then final annealed. Final annealing is the final annealing step to define mechanical properties and makes the tubes straight. 4. The drawn tubing is exported to CMT in the United States. where it is cut to length, and a unique pattern is laser cut into the tubing according to the required Stent Geometry per customer specifications for a particular part number.
It is this unique pattern that determines the stent's final shape. Once laser cut, the material is dedicated to a single part number and cannot be used for anything else. It is now called an “as-cut.” It has a pre-determined end-use, to be that of a specific stent, so designated by the unique laser cut pattern of a particular part number. 5. As-cut tubes/stents are sent to Costa Rica where they are expanded by using mandrels or other tooling and undergo a heat treatment.
Then they receive a chemical treatment to etch and polish the surface. Lastly, they are inspected and returned to the United States. Costa Rica Processing Details: as-cut and further processed In Costa Rica, the “as cut” stent undergoes the following processes: 1. Internal and External Surface Treatment: Honing, Tumbling, and Micro Blasting. 2. Thermal treatment processes with Salt Baths for Diameter Expansion and Transformation Temperature Set . 3.
Finished Surface Properties and Surface Finish: Etching and Electropolish. 4. Quality control inspection, labeling, and packaging. You explain that the superelastic behavior of nickel–titanium (nitinol) is the key property that makes it uniquely suited for self-expandable stent applications.
This behavior allows nitinol to undergo large, reversible strains through stress-induced martensitic transformation, enabling the stent to be crimped to a small diameter and subsequently recover its intended shape upon deployment in the human body. Both the laser-cut form and the final heat-treated stent exhibit superelasticity. The heat treatment performed in Costa Rica does not create superelasticity — it is already inherent in the material.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358379).