The country of origin and marking of cylinder head assemblies for diesel trucks
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, it is the opinion of this office that the country of origin of the completed articles will be either the United Arab Emirates or Mexico, depending on where the processes listed above were performed.
Ruling text
In your letter dated January 30, 2026, you requested a country of origin and marking ruling for cylinder head assemblies (cylinder heads) for diesel engines used in heavy trucks on behalf of your client, DPM PowerPro LLC, located in Houston, Texas. You provided videos and documents showing the manufacturing process, and a bill of materials showing the country of origin of each component and part. The merchandise under consideration is described as cylinder head assemblies for diesel trucks.
Cylinder heads are core components of diesel engines used in heavy trucks. Located at the top of a diesel engine, the cylinder heads serve as a critical part of a compression-ignition internal combustion piston engine. You state that your client imports twelve (12) distinct cylinder head models (G02, G05, G06, G09, G10, G11, G12, G13, G14, G15, G16, G17) which are produced by Yantai Jereh Power-Tech Company-China. The differences in the various models are primarily the shape and dimensions.
You provided a long list of examples of heavy-duty engines, and vehicles your clients’ cylinder heads are designed for. These include: Cummins ISX engine The Cummins ISX engine Freightliner Cascadia Kenworth W900 The Peterbilt 387 You state that the cylinder heads are assembled in either the United Arab Emirates or Mexico with primarily Chinese components and parts. According to your BOM, the remaining components are from Argentina and Turkey.
You state that the cylinder heads are made from gray cast iron cast in China. “Gray Iron” is a type of cast iron, characterized by a metallographic microstructure of flake graphite. The sand castings are then filled with molten metal materials and milled to remove excess materials from the surface of the casting before exporting for assembly. The cylinder head manufacturing process, which you provided detailed video of, takes place in either the United Arab Emirates or Mexico.
Regardless of where production occurs, manufacturing contains the following steps: Machining the top surface and the holes on the top surface. Machining the bottom surface and the holes on the bottom surface. Drill oil passage holes. Drill inclined oil holes. Mill four side surfaces and all holes on four faces. Machine injector sleeve holes, drilling, and tapping. Machine camshaft holes.
Finish milling the bottom surface, finish reaming the locating pin holes, and finish boring the intake manifold holes and seat ring holes. Finish milling the recessed top surface and finish boring the exhaust manifold holes, seat ring holes, and injector sleeve holes. Apply anaerobic sealant to the bowl plugs, then press the 21 D28.75mm bowl plugs and 7 D44.6mm. bowl plugs into the cylinder head.
Install the six sealing rings onto the six injector sleeves, apply anaerobic sealant to the injector sleeves, and then press the injector sleeves into the cylinder head. Roll and ream the six installed injector sleeves using a CNC machine tool. Press the 24 valve guides, 12 intake valve seats, and 12 exhaust valve seats into the cylinder head. Ream the 24 valve guides, 12 intake valve seats, and 12 exhaust valve inserts.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358381).