The country of origin of a magnetic coil assembly
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the Magnetic Coil Assembly, part number 42405, will be Vietnam in both scenarios described above.
Ruling text
In your letter dated February 4, 2026, you requested a country of origin ruling on behalf of your client, HTI Global Point. The merchandise under consideration is identified as a Magnetic Coil Assembly, part number 42405, which is used in a solenoid pump. The assembly consists of loops of electrical wire wound around a bobbin. Applying a current to the wire coil generates a magnetic field that actuates a plunger, which allows fluid to flow through the pump.
Two manufacturing scenarios were presented for consideration, both of which begin with producing a coil assembly in Vietnam. The process is described as winding two different diameter wires consecutively around a bobbin, wrapping the wires with a layer of polyethylene terephthalate, and twisting the finish end of the first wire to the start end of the second wire. The ends are then soldered together and set in place using glue.
In the first scenario, you state that the coil assembly will be manufactured as described above and shipped to China for the remainder of the assembly operations. The operational steps that occur in China involve soldering the coil wires to a Chinese printed circuit board assembly (PCBA), soldering two lead wires, and performing a simple functional test. The PCBA is described as a basic controller that consists of three diodes, five resistors, and a PNP transistor.
Its function is to send power to the coil assembly and oscillate the timing of the electromagnetic coils. In the second scenario, you state that the Chinese PCBA will be shipped to Vietnam for the remainder of the assembly operations. The PCBA is connected to the Vietnamese coil assembly using the same operational steps as described in the first scenario.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
CBP has held that whether an assembly process is sufficiently complex to rise to the level of a substantial transformation is determined upon consideration of the totality of the circumstances, which includes a review of the country of origin of the item’s components, the extent of the processing that occurs within a country, and whether such processing renders a product with a new name, character, and use.
Assembly operations that are minimal or simple, as opposed to complex or meaningful, will generally not result in a substantial transformation. A significant factor in determining a product's country of origin is identifying the component (or components) that impart its essential character.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358555).