The country of origin of radiofrequency (RF) remote control transmitters
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated February 5, 2026, you requested a country of origin ruling on behalf of your client Horizon Hobby, LLC. The merchandise under consideration is radio frequency (RF) remote control transmitters, models NX8+ (I tem No. SPMR8210A) and NX10+ (Item No. SPMR10120A). These handheld radio controllers are used to control remote-controlled airplanes from a distance. These radio remote control transmitters are comprised of components that are manufactured in a variety of countries.
They contain three printed circuit board assemblies (PCBAs): a Plano RF transmitter module PCBA, an MBA main computer PCBA, and a Waco Receiver PCBA. These PCBAs perform RF transmission, reception, control, and analog to digital processing functions. As per the information provided, all three PCBAs will be manufactured in the United States (U.S.) using surface mount technology (SMT).
This process encompasses dual in-line packaging (DIP) and wave soldering, including populating a bare printed circuit board (PCB) with various electrical and electronic components (resistors, capacitors, fuses, RF chips, etc.) through solder paste printing, pick-and-place, solder reflow, automated optical inspection, x-ray inspection, etc. Next, the completed PCBAs are tested and firmware is added. They are then shipped to China for final assembly.
In China, the following assembly operations occur: plastic housing will be screwed and snapped together, gimbals or sticks will be screwed, pressed, and soldered with wire harnesses, cables and switches will be soldered and press-fit into housing, the LCD screen will be screwed into the plastic housing and attached to the cables, the PCBAs will be attached into plastic housing, software will be installed and firmware will be updated, the battery will be added, decals will be applied, and functional testing will be done.
Lastly, the radio control transmitters will be packaged and shipped. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Based on the information provided, it is the opinion of this office that the PCBA contributes to the main functionality of the finished radio remote transmitters. The complex SMT manufacturing production of these PCBAs, which includes the placement of numerous individual components onto a bare PCB, creates functional PCBAs that result in a substantial transformation of the components to produce PCBAs of U.S. origin.
Additionally, the assembly process performed in China would not substantially transform the PCBAs of U.S.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358589).