The country of origin determination for face masks; 19 CFR 102.21 (c)(2)
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The country of origin of the face masks is Thailand pursuant to 19 CFR 102.21 (c)(2).
Ruling text
This is in reply to your letter dated February 6, 2026, requesting a classification and country of origin determination on behalf of your client, Primed Medical Products Inc, for face masks. In lieu of a sample, photographs of the product were provided to this office. The items, described as “ASTM Level 1 to Level 3 Face Masks,” are unisex nonwoven disposable face masks that are intended to be used as a protective face covering.
Each pleated face mask is composed of three or four layers of nonwoven textile fabric: a 100 percent polypropylene melt-blown nonwoven fabric is sandwiched between two or three layers of 100 percent polypropylene spun bonded nonwoven fabric. Each face mask features an aluminum strip on the top edge which lies on the bridge of the nose to help the mask conform to the contours of the face and is fastened behind the ears with nylon ear loops.
You state the dimensions of the face masks ranges from 6 inches in length by 3 ¾ inches in width to 7 ¼ inches in length by 4 ¼ inches in width. You also state the total weight of the face masks have a range from 60 grams per square meter (gsm) (Level 1) to 100+ gsm (Level 3).
You state the manufacturing operations for the face masks are as follows: Thailand: 100 percent spun bonded polypropylene nonwoven fabric (outer and inner layers) is formed and shipped in rolls to Laos. 100 percent melt-blown polypropylene nonwoven fabric (middle layer) is formed and shipped in rolls to Laos. China: 100 percent nylon ear loop is produced and shipped in bulk bags to Laos. Aluminum nose bridge is produced and shipped to Laos. Laos: Nonwoven fabric is cut to the required width.
The two edges and the aluminum nose bridge are ultrasonically welded. Fabric is pleated and mask is cut to required size. The remaining two side edges are ultrasonically welded, and the ear loops are attached to the mask. The completed masks are inspected, packaged, and shipped to the United States. ISSUE: What is the country of origin of the subject merchandise?
COUNTRY OF ORIGIN - LAW AND ANALYSIS: Section 334 of the Uruguay Round Agreements Act (“URAA”) (codified at 19 U.S.C. 3592), enacted on December 8, 1994, provides the rules of origin for textiles and apparel products for purposes of the customs laws and the administration of quantitative restrictions, unless otherwise provided by the statute, entered, or withdrawn from warehouse, for consumption on or after July 1, 1996.
Section 3592 has been described as Congress’s expression of substantial transformation as it relates to textile and apparel products. Section 102.21 of the Code of Federal Regulations (19 CFR 102.21), implements the URAA. The country of origin of a textile or apparel product shall be determined by the sequential application of the general rules set forth in paragraphs (c)(1) through (5) of section 102.21. See 19 CFR 102.21(c).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358610).