The country of origin of a power bank
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated February 16, 2026, you requested a country of origin ruling on behalf of your client, Anker Innovations Technology Co., Ltd. The merchandise under consideration is referred to as the MagGo Power Bank, model number A1657, and is described as a portable power bank with a nominal capacity of 10 Ah and a total maximum output of 35 W. It consists of two cylindrical lithium-ion battery cells encased inside a rectangular housing with a built-in USB-C cable, a USB-C port, a wireless watch charger, and a LCD screen.
The subject power bank is assembled in China. All components are sourced domestically in China, except for the battery cells which are sourced from Malaysia. The assembly process begins with wrapping thermal insulation around the battery cells, soldering wires to the battery cell terminals, and installing heat shrink tubing. Next, workers preassemble a watch charging module.
This process involves mounting a wireless charging coil in a protective cover, soldering the charging coil to a printed circuit board assembly, and fastening the assembly to the upper shell housing of the power bank. The battery cells and watch charging module are soldered to the main printed circuit board assembly before the entire assembly is mounted in the bottom shell housing.
Afterwards, workers attach a USB charging cable, apply thermal silicone, and press the upper shell onto the bottom shell to seal the device. Throughout the process, various visual inspections, functional tests, and calibrations are performed. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters (HQ) ruling H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
U.S. Customs and Border Protection has previously held that the assembly of battery cells into a power bank does not result in a substantial transformation of the battery cells because the essential character of the cells does not change simply by being placed together in a plastic housing. See HQ ruling 563045, dated August 9, 2004, and HQ ruling 734393, dated March 20, 1992.
Here, the function of the Malaysian battery cells is to store and provide power, and the function of the battery cells in the finished power bank is likewise to store and provide power. In view of these facts, and based on the totality of the circumstances, the country of origin of the MagGo Power Bank, model number A1657, is Malaysia. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358901).