The classification and country of origin of wood veneers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter, dated February 16, 2026, you requested a binding classification and country of origin ruling on wood veneers. Product information and photos were provided for our review. The product under consideration is Danzer LINEA veneers in oak and walnut. The veneers will measure approximately 0.55 – 0.65 mm in thickness. The LINEA veneers are of similar construction to reconstituted veneer. Many veneers are laminated together into a block and sliced to form a wood veneer with a linear structure and pattern.
The veneers that will be bonded together are all American white oak (Quercus alba, a non-coniferous wood) or American walnut (Juglans nigra, a non-coniferous wood) of a thickness of 0.50-0.51mm. They will not be mixed with other species of wood or dyed, coated, or impregnated. You do not indicate that these veneers will be spliced. The finished veneers will measure approximately 2 feet wide by 8, 10, or 12 feet long.
You do, however, indicate that the veneers may be subjected to an additional splicing operation that will result in veneers measuring approximately 4 feet wide by 8 or 10 feet long.
The applicable subheading for the unspliced LINEA oak veneer will be 4408.90.0181, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: Other: Other: Oak (Quercus spp.): Other. The general rate of duty will be free.
The applicable subheading for the unspliced LINEA walnut veneer will be 4418.90.0187, HTSUS, which provides for Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: Other: Other: Walnut (Juglans spp.). The general rate of duty will be free.
The applicable subheading for spliced LINEA oak veneer will be 4408.90.0137, HTSUS, which provides for Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: Other: Spliced or end-jointed: Oak (Quercus spp.): Other. The general rate of duty will be free.
The applicable subheading for spliced LINEA walnut veneer will be 4408.90.0145, HTSUS, which provides for Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm: Other: Spliced or end-jointed: Walnut (Juglans spp.). The general rate of duty will be free.
For origin, you outline a scenario wherein US-origin, whole wood veneers are shipped to the Czech Republic where they are glued and laminated into a block under heat and high pressure.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N358917).