The country of origin of a Broadcast Spreader
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated February 24, 2026, on behalf of your client, Meridian International Co., Ltd., you requested a country of origin ruling on a Broadcast Spreader and a Handheld Spreader. Pictures of the merchandise in different stages of manufacture were included with your submission, along with manufacturing flow charts. Please note that our office will address the Handheld Spreader in a separate letter.
The Broadcast Spreader is a wheel-driven centrifugal spreading device that is used to disperse materials such as seeds and fertilizers over large lawns and farmlands. When the user pushes the device forward, two large wheels roll along the ground and directly drive a spreading plate/disc that is located below the hopper. The spreading plate/disc rotates at a high speed through an internal transmission mechanism (gears or shafts).
The flow rate of the material being spread is controlled by adjusting the opening of the hopper gate at the bottom via a control lever on the handle. The material falls from the opening at the bottom of the hopper onto the rotating plate/disc below. The high-speed rotating plate/disc uses centrifugal force to project the material outward in all directions, forming a uniform fan-shaped or band-shaped coverage.
The forward speed of the wheels is directly related to the rotational speed of the plate/disc, so the user’s walking speed will affect the application rate per unit area and the coverage width. You have stated that the manufacturing process for the Broadcast Spread begins in Cambodia, where raw plastic materials are used for the injection molding of the following subcomponents: hopper, wheels, top cap of gear box, spread plate/disc, and gear.
In China, raw plastic materials are used for the injection molding of the subsequent subcomponents: gear box (bottom), gear box sheath, triangular nut, adjusting nut, material discharge opening, material discharge control plate, discharge flap, rate control dial, control housing (top and bottom), gear adjustment block, trigger, washer, shaft pin, wire control, wire control slider, rate control slider, wheel cap, and steel tube cap.
Also in China, metal is punched and bent into the metal axle, metal handles, metal foot, metal support, metal connection part, metal connection rod, and metal control housing. The metal handles are then welded together and powder coated. Next, the Cambodian subcomponents (i.e., the hopper, wheels, top cap of gear box, spread plate/disc, and gear) are shipped to China and manually assembled with the Chinese subcomponents.
Finally, the finished Broadcast Spreader is packaged for retail sale before shipment to the United States. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359138).