The tariff classification of three metallic solder powders from Malaysia
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Key passages, quoted from the ruling
- The applicable subheading for the 90iSC DAP (Type 4) Solder Powder, 90iSC AGP (Type 3) Solder Powder, and 97SC AGP (SAC 305 Type 3) Solder Powder will be 7106.10.0000, HTSUS, which provides for “Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form: Powders.” The general rate of duty will be Free.
Ruling text
In your letter dated February 25, 2026, you requested a tariff classification ruling. The products under consideration are fine metallic powders, identified as 90iSC DAP (Type 4) Solder Powder, 90iSC AGP (Type 3) Solder Powder, and 97SC AGP (SAC 305 Type 3) Solder Powder. The stated components include tin (CAS no. 7440-31-5), silver Ag powder (CAS no. 7740-22-4), bismuth (CAS no. 4470-69-9), antimony (CAS no. 7440-36-0), copper metal (CAS no. 7440-50-8), and nickel (CAS no. 7440-02-0).
A representative sample of each item was submitted with your request and was sent to the U.S. Customs and Border Protection (CBP) laboratory for analysis. CBP laboratory analysis has determined that the 90iSC DAP (Type 4) and 90iSC AGP (Type 3) samples contain tin, silver, bismuth, antimony, and copper. The 97SC AGP (SAC 305 Type 3) sample was determined to contain tin, silver, and copper.
The silver content for each sample is estimated to be more than 2 percent of the sample by weight, with the 90iSC DAP (Type 4) and 90iSC AGP (Type 3) samples estimated to contain more than 3 percent silver by weight. Furthermore, the laboratory determined that more than 90 percent of each sample has a particle size smaller than 0.5mm.
You suggest classification of the three solder powders in subheading 7106.10.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Silver (including silver plated with gold or platinum), unwrought or in semimanufactured forms, or in powder form: Powders. We agree.
Note 5 to Chapter 71 of the HTSUS states that, “... any alloy containing precious metal is to be treated as an alloy of precious metal if any one precious metal constitutes as much as 2 percent by weight, of the alloy...” Note 5(c) states “Other alloys containing 2 percent or more, by weight, of silver are to be treated as alloys of silver.” Since all three solder powders contain more than 2 percent silver by weight, they must be treated as alloys of silver.
Subheading Note 1 to Chapter 71 states that for the purposes of subheading 7106.10, the expressions “powder” and “in powder form” mean products of which 90 percent or more by weight passes through a sieve having a mesh aperture of 0.5 mm. Because CBP laboratory evaluation confirmed that more than 90 percent of each sample satisfies this sieve requirement, the products meet the legal definition of a powder.
The applicable subheading for the 90iSC DAP (Type 4) Solder Powder, 90iSC AGP (Type 3) Solder Powder, and 97SC AGP (SAC 305 Type 3) Solder Powder will be 7106.10.0000, HTSUS, which provides for “Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form: Powders.” The general rate of duty will be Free. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change.
The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359193).