The country of origin of an air purifier
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated February 27, 2026, you requested a country of origin ruling on an air purifier. Descriptive literature was provided for our review. This request is similar to New York Ruling N359250 with a slight change in product sourcing and manufacturing. The item under consideration is described as the Columbia air purifier, which is a smart home appliance engineered for indoor air quality management. This device employs a comprehensive filtration system designed to capture 99.97% of airborne particles.
Its multi-layered approach begins with a washable pre-filter to trap larger debris such as dust, hair, and pet fur. This is followed by an activated carbon filter, which effectively neutralizes volatile organic compounds (VOCs) and common household odors from sources like pets, smoke, and cooking. A true HEPA filter then captures 99.97% of microscopic allergens, including pollen, mold spores, and pet dander.
The Columbia model also features intelligent air quality monitoring with automatic fan speed adjustments, an energy-efficient eco mode, and a compact design, making it an ideal solution for maintaining a healthy and comfortable residential environment. The air purifier is assembled in Thailand with components sourced from Thailand, South Korea, Japan, and China.
The sensor particle is produced in Japan while the composite filter, motor and blade assembly, cover motor guide, magnetic cistern cover, printed board assembly (PBA)-power, PBA-key assembly, and PBA-main are sourced from China. The insert fan assembly, sensor select bar and PBA-WiFi assembly are all from South Korea.
The remaining parts are all sourced from Thailand including the guide fan, fan, and all of the additional nuts, bolts, washers, packaging, and plastic components necessary to complete the finished article. The manufacturing process for the air purifier components begins in Thailand, where plastic resin is fed into injection molding equipment to produce various semi-finished parts essential for assembly, such as the filter assembly, covers, lens key, and lens light sensor.
Concurrently, in China, the filter assembly is meticulously constructed by filling a deodorizing filter case with activated carbon. A hexagonal mesh is then thermally bonded to this assembly using a heat/cold press system. The deodorizing filter is subsequently integrated with a HEPA filter pack within a paper frame, secured with double-sided tape and hot-melt adhesive. A nonwoven handle is attached, and the paper frame’s perimeter is reinforced and bonded with polyurethane (PU) foam.
The final stages involve the application of labels, finishing with filament tape, and packaging of the completed assembly. Following the manufacturing of injection-molded plastic resin components, the air purifier undergoes a comprehensive assembly process, segmented into distinct sub-assembly and main assembly stages. In the sub-assembly phase, various semi-finished components are sequentially integrated.
This includes mounting the PBA-power onto the cover-power lower and establishing electrical connections with harness-power connectors.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359251).