The country of origin of a LiDAR Module
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated March 3, 2026, on behalf of your client, Hesai (Thailand) Limited, you requested a country of origin ruling on a Light Detection and Ranging (LiDAR) Module. Descriptive literature was provided for our review. The item under consideration is described as the Hesai OT128 LiDAR Module, which functions as a high-resolution, 360-degree automotive sensor for autonomous driving and smart logistics.
The module creates detailed 3-dimensional maps for obstacle detection, navigation, and environmental awareness by using laser beams to measure distances. It provides core perception capabilities for L4 autonomous driving (robotaxis/robot trucks) and is applied to industrial automation scenarios such as smart ports, automated guided vehicles (AGVs), Autonomous Mobile Robots (AMRs), and service robots to enable precise navigation and obstacle avoidance.
The OT128 LiDAR Module is composed of a Top Cover, Cover Lens, Lens Housing (also referred to as the opto-mechanical unit), and Base. The Lens Housing consists of the Lens Housing Semi-Finished Product (SFP), which includes the RX Module, TX Module, a series of lenses, the Top Main Board (TMB) Semi-Finished Product (this includes the TMB Board), and the Heat Sink Semi-Finished Product. Core components of the Lens Housing Semi-Finished Product (SFP) include the RX Module, TX Module, and a series of lenses.
The TX Module is responsible for generating and sending out pulses of laser light into the environment. The TX Module includes the Transmitter Board, flexible printed circuit boards (FPC), front and back brackets, and a stop aperture. The RX Module is responsible for detecting the reflected light and enabling distance calculation. It includes the Receiver Front Board and Receiver Back Board, FPCs, a stop aperture, and a filter.
The TMB SFP includes the TMB printed circuit board assembly (PCBA), which controls the timing of laser emission and reception, collects analog to digital converter (ADC) waveforms, calculates information such as distance and reflectance, and sends the packetized point cloud data to the Bottom Main Board (BMB) in the Base. The TMB SFP also includes the optical communication transmitter board of Chinese-origin.
The BMB is part of the Base SFP and controls the wireless power supply module to power the optical engine, controls the rotation of the motor, collects encoder data to obtain real-time angle information, repackages the real-time point cloud data obtained from TMB, and then transmits it externally via the Ethernet. In your letter, you provide three separate manufacturing scenarios.
The difference between the three scenarios is the country in which certain PCBAs undergo surface mount technology (SMT) assembly; all other assembly processes remain the same. Final assembly of the LiDAR Module occurs in Thailand in all three scenarios. In scenario I, the TMB PCBA, BMB PCBA, RX PCBA and TX PCBA are assembled in Thailand using standard SMT processes. All other components of the finished product are of Chinese origin.
Subsequent assembly processes are completed in Thailand, and the finished LiDAR Module is shipped from Thailand to the United States.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N359371).